Cooling System
T16R Standard Steel Radiator Cap
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
$9.99
Molded Heater Hose
Dayco Small I.D. Molded Heater Hose
Designed to replace OEM coolant hose and provide long, reliable service in applications where molded hoses in small diameters are required.
Made with the same bends and routing as the OEM assembly, this molded hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation. In addition to meeting SAE J20R3, Class D-1 requirements, the Dayco small I.D. molded heater hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
$7.99Molded Heater Hose
$7.99
Lower Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$14.99Lower Radiator Hose
$14.99
Curved Radiator Hose
Capable of withstanding extreme temperatures and high-pressure environments, all Dayco coolant hoses are designed to meet OE specifications as well as all relevant SAE standards.
$4.99Curved Radiator Hose
$4.99
Engine Coolant Thermostat Housing
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
$11.99
Engine Water Pump
Working of Water Pump
Water cooled Engine is to have cooling system that cooling water (LLC) is made to circulate to Radiator. Cylinder Block and Water Jacket in the Cylinder Head and keep Engine at the suitable temparature.
Water Pump is installed in the front of Cylinder Block. is driven with Timing Belt or Fan Belt through Pulley and work to make cooling water (LLC) circulate.
$31.99Engine Water Pump
$31.99
Engine Water Pump
Working of Water Pump
Water cooled Engine is to have cooling system that cooling water (LLC) is made to circulate to Radiator. Cylinder Block and Water Jacket in the Cylinder Head and keep Engine at the suitable temparature.
Water Pump is installed in the front of Cylinder Block. is driven with Timing Belt or Fan Belt through Pulley and work to make cooling water (LLC) circulate.
$39.99Engine Water Pump
$39.99
Engine Water Pump
Water cooled Engine is to have cooling system that cooling water (LLC) is made to circulate to Radiator. Cylinder Block and Water Jacket in the Cylinder Head and keep Engine at the suitable temparature.
Water Pump is installed in the front of Cylinder Block. is driven with Timing Belt or Fan Belt through Pulley and work to make cooling water (LLC) circulate.
$35.99Engine Water Pump
$35.99
Coolant Antifreeze – Mopar
Modern engine cooling systems are designed to operate year round with a diluted concentration of high quality ethylene glycol base antifreeze / coolant and water. Meets automotive industry requirements for anti-freeze and anti-boil protection. Provides excellent corrosion protection to all cooling system metals. This formula must not be mixed with regular [green] antifreeze. Doing so will reduce the extended life characteristics of this product to regular antifreeze levels.
$22.99Coolant Antifreeze – Mopar
$22.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$16.99Curved Radiator Hose
$16.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$24.99Curved Radiator Hose
$24.99
Engine Water Pump
- 100% factory tested for leakage and dimensional precision
- Bearing noise and durability-tested
- Designed to match OE coolant flow rate and pressure
$40.99Engine Water Pump
$40.99
Thermostat-170 Degrees
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Water Pump
AISIN takes pride in being the No. 1 water pump supplier to Japanese automobile manufactures. Utilizing the experience and knowledge gained throughout the years of cooperation directly with automotive manufacturers, AISIN is able to employ a technological advantage in manufacturing and supplying the best in quality and the most durable of products. With this momentum, AISIN is increasing the development, manufacturing and supply for European and American automobile manufacturers.
- AISIN Water Pumps are engineered to provide reliable and efficient cooling to the engine, by circulating coolant throughout the engine block, while also being durable enough to withstand the rigors of daily use and high mileage.
- AISIN Water Pumps are an essential component of the engine’s cooling system. They are responsible for circulating coolant throughout the engine block, which helps to keep the engine running at the proper temperature. AISIN manufactures high-quality OE water pumps that are designed to provide reliable and efficient cooling to the engine. They are engineered to withstand the rigors of daily use and high mileage, ensuring that the engine runs at the proper temperature even under heavy loads or high-performance driving conditions.
- In addition to providing reliable and efficient cooling, AISIN water pumps also help extend the life of the engine by preventing overheating and any possible damage caused by high temperatures. They are also designed to operate quietly and be low maintenance.
$42.95Water Pump
$42.95
Engine Water Pump
Working of Water Pump
Water cooled Engine is to have cooling system that cooling water (LLC) is made to circulate to Radiator. Cylinder Block and Water Jacket in the Cylinder Head and keep Engine at the suitable temparature.
Water Pump is installed in the front of Cylinder Block. is driven with Timing Belt or Fan Belt through Pulley and work to make cooling water (LLC) circulate.
$42.95Engine Water Pump
$42.95
Radiator: With Transmission Oil Cooler
Warranty Details (LIMITED LIFETIME REPLACEMENT)Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicles engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
$200.00
Hose, Water (Upper)
Our molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped to fit and to ensure perfectly sealed conditions.
- Aramid or rayon knit reinforcement (depending on the application).
$19.99Hose, Water (Upper)
$19.99
Hose Water (Lower)
Our molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped to fit and to ensure perfectly sealed conditions.
- Aramid or rayon knit reinforcement (depending on the application).
$25.99Hose Water (Lower)
$25.99
Radiator Lower Hose
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40˚F (-40˚C) to +257˚F (+125˚C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
$19.99Radiator Lower Hose
$19.99
Radiator cap
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
$11.99Radiator cap
$11.99
Upper Hose
Our molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped to fit and to ensure perfectly sealed conditions.
- Aramid or rayon knit reinforcement (depending on the application).
$12.99Upper Hose
$12.99
Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J168
$15.99Curved Radiator Hose
$15.99
Engine Coolant Thermostat Seal
Gaskets are made from high quality materials suitable for resistance to high temperatures and engine coolant to maintain a good seal. On adhesive backed gaskets, the backing reduces installation time by ensuring proper alignment and ease of installation. Thermostat seals are precision designed and made from high quality rubber products ensuring an accurate fit and durability for a long lasting seal.
Features:
- High quality materials used for increased strength and durability
- Adhesive backed gaskets reduce installation time and ensure proper alignment
- Meets or exceeds all OEM standards
$4.99
Thermostat-180 Degrees
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
$14.99Thermostat-180 Degrees
$14.99
