STABILIZER BAR BUSHING KIT

rn
• rn
  rn

  Applications

  rn

  rn

  rn

  rn

  rn

  rn

  rn

  rn

  rn

  rn

  rn

  rn

  rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn Make rn rn rn rn rn rn rn rn Model rn rn rn rn rn rn rn rn Year Range rn rn rn rn rn rn rn rn Position rn rn rn rn rn rn rn rn Drive Wheel rn rn rn rn rn rn rn rn Veh. Qty. rn rn rn rn rn rn rn rn Engine Base rn rn rn rn rn rn rn rn Engine VIN rn rn rn rn rn rn rn rn Engine Desg. rn Ford F-250 1999 Front To Frame 4WD 1 Ford F-250 Super Duty 2019-2017 Rear To Frame 1 Ford F-250 Super Duty 2006-1999 Front To Frame 4WD 1 Ford F-350 Super Duty 2019-2007 Rear To Frame 1 Ford F-350 Super Duty 2006-1999 Rear To Frame 4WD 1 Ford F-350 Super Duty 2004-1999 Front To Frame 4WD 1 rn COMMERCIAL, INDUSTRIAL & AG. rn rn Ford   F-450   Super Duty   2004-1999 rn Ford   F-450   Super Duty   2019-2017 rn Ford   F-550   Super Duty   2004-1999 rn Ford   F-550   Super Duty   2018-2017 rn rn

  rn

  rn

  rn

  rn

rn

rnTo determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.rn

rn
1. Use a digital caliper or micrometer for a precise reading

rn

2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening

rn

3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8″. 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.

rn

rn rnrn