No products in the cart.
3/8-in Drive 13/16-in Spark Plug Socket
Your toolbox isn’t complete without the 3/8-inch Drive 13/16-inch Spark Plug Socket. This socket comes with large size markings and a rust resistant coating.
- CORROSION RESISTANCE: Full Polish Chrome Finish
- INCREASED TORQUE: 6 Point Socket with fastener
- QUICK SIZE IDENTIFICATION: Large Markings
- Meets or Exceeds ASME Specifications
$10.993/8-in Drive 5/8-in Spark Plug Socket
Your toolbox isn’t complete without the 3/8-inch Drive 5/8-inch Spark Plug Socket. This spark plug socket comes with large size markings and a rust resistant coating.
- CORROSION RESISTANCE: Socket with full polish chrome finish
- INCREASED TORQUE: 6-point spark plug socket with fastener
- Meets or Exceeds ASME Specifications
- QUICK SIZE IDENTIFICATION: 5/8 spark plug socket has large markings
$10.99TotalEnergies Fluidmatic LV MV
Innovative automatic transmission fluid based on an advanced synthetic technology allowing very high performance.offers fuel economies thanks to low viscosity.developed to meet the needs of modern transmission where higher efficiency is required.low viscosity formulation that meets the more demanded OEM specifications.recommended for use in the latest generation of high efficiency 6-speed automatic transmissions with longer fluid life capabilities and heavier load capacities.$10.99Engine Timing Belt Idler
When working with Serpentine and Timing Belts, Tensioners and Idler Bearings are vital to ensure proper engine performance. In some situations, a Tensioner or Idler Bearing is a critical component in protecting your engine from severe damage and catastrophic failure. GMB Tensioner and Idler Bearings features include:
- Rigorous testing and quality control for all bearing components.
- Built to withstand High-Performance use and optimal operation.
- Triple-Lip seal design to maximize grease retention and prevent contamination.
- Precise tolerances for easy installation.
It’s never a good idea to compromise on the quality of Belt Tensioners and Idler Bearings. GMB is known for Global OEM Manufacturing technology, and our proprietary designs ensure your parts are built to last.
$12.99Engine Timing Belt Idler
$12.99TotalEnergies FLUIDMATIC CVT MV
Fluidmatic DCT MV is a dual clutch transmission fluid based on an advanced synthetic technology which covers 95% of the wet clutch DCT market.Fluidmatic DCT MV is suitable for service fill in the following vehicles brands:– German OEM : Volkswagen / BMW / Mercedes / Porsche / Smart– Asian OEM : Mitsubishi– European OEM : Renault / VolvoFluidmatic DCT MV contains the latest shear stable viscosity modifier technology allowing a very high performance.$12.99Impact Rated™ 3-in Magnetic Screwdriving Bit Holder Set
IMPACT RATED™ 3-in. Magnetic Screwdriving Bit Holder Set is engineered to last longer than standard bits. The optimized torsion zone is designed for Impact Driver use, while each bit tip ensures a precise fit in each screw recess, helping to reduce wear, stripping and cam-out.
$13.99Wheel Bearing Collar
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$20.00Wheel Bearing Collar
$20.00Hose Water (Lower)
Our molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped to fit and to ensure perfectly sealed conditions.
- Aramid or rayon knit reinforcement (depending on the application).
$25.99Hose Water (Lower)
$25.99Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
$25.99Wheel Bearing
$25.99Engine Water Pump
All mechanical GMB water pumps meet or exceed OEM standards for performance and durability.
- Whether the housing is made of cast iron, aluminum, or stamped steel, our tight manufacturing tolerances make installation simple and trouble-free.
- Cooling is maximized with our precision-formed impellers and tested to meet or exceed OEM flow rate specifications at various RPMs.
- Our proprietary shaft seal design withstands wear, preventing leaks and maximizing longevity.
- Our genuine GMB steel bearings are made from top-quality materials.
Water pump failures can cause catastrophic damage to an engine; we make sure every GMB Water Pump will meet or exceed OEM specifications. And because we manufacture every water pump to tight tolerances, our dimensions are accurate, and installation is easy (easy installation is essential, as it prevents many of the issues that lead to leaks and premature failure).
When it’s time to replace the water pump in your vehicle, it makes sense to go with a reliable, top-quality replacement from GMB.
$33.99Engine Water Pump
$33.99Water Pump
High-Strength Steel Bearing
GMB has manufactured bearings for over 75 years in the global market for both the OEM and aftermarket industries. GMB has studied all aspects of bearing manufacturing to design the highest-quality bearings with proper high-grade steel, precision bearing race machining and polishing, and proper grease selection. GMB uses roller bearings for all high-load applications.
Proprietary Formulated Mechanical Seal
GMB Mechanical Shaft Seals are made with proprietary elastomers and agents for protection and sealing power. GMB Shaft Seals utilize carbon and ceramic sealing surfaces for superior wear resistance.
Precision OEM-Spec Water Pump Housing
GMB Water Pump Housings are manufactured to match the exact OEM-spec materials (cast iron, aluminum, or stamped steel). Each housing is precision measured using state-of-the-art technology to be dimensionally correct up to a 99% accuracy with strict tolerance limits.
Precision-Formed Impeller
GMB Water Pump Impellers are manufactured to match the exact OEM-spec materials (metal or polymer composite) based specifically on the OEM design. Each impeller is also precision measured to be dimensionally correct up to a 99% accuracy with strict tolerance limits.
$33.99Water Pump
$33.99Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$39.99Wheel Bearing
$39.99
