No products in the cart.
rn
rnrnUnfortunately, this specific product is not eligible for any warranty. Whilst this product is not eligible, further information about our warranties can be located below.rnrn
rnLearn Morernrn
rn
25cc, 2-Cycle 17-in. Straight Shaft Gas WEEDWACKER® Trimmer
rnrnOur 25cc, 2-cycle gas powered straight shaft WEEDWACKER® trimmer is lightweight and easy to use. Its 17-in. cutting width allows you to trim more grass in less time and is equipped with Easy Start technology for simpler pull starts, as well as easy 3-step starting; prime, choke, pull. The 2-in-1 bump head combines convenience of a fixed line head and an easy to load bump-feed system. This design gives you the choice of 2 different line sizes allowing you to get most any trimming job done. The WEEDWACKER® trimmer head feeds .095-in. bump and .110-in. fixed line. The multi-position adjustable handle reduces vibration and operator fatigue. Our WEEDWACKER® trimmer is attachment capable to convert into many other lawn care products (attachments sold separately).
rnrn
rn
rnrn
$259.9927cc, 2-Cycle 18-Inch Attachment Capable Straight Shaft Brushcutter with Bump Head
rnrnOur 27cc, 2-cycle gas powered straight shaft brushcutter is lightweight and easy to use. Its full-crank engine provides greater power and less vibration. Its 18″ cutting width allows you to trim more grass in less time and is equipped with Easy Start technology for simpler pull starts and easy 3-step starting. The brushcutter is multi-use and comes with a fully equipped WEEDWACKER® trimmer attachment. The adjustable handle provides added control and easy right or left-handed use. Our 27cc, 2-cycle gas powered straight shaft brushcutter is attachment capable to convert the brushcutter into many other lawn care products (attachments sold separately).
rnrn
rn
rnrn
$319.9942cc 2-Cycle 16 in Gas Chainsaw (S165)
rnrnOur Gas-Powered Chainsaw features a 42cc full-crank, high-output engine to deliver steady power. The 16 in. low-kickback bar and chain go through even the toughest wood quickly and easily. It is equipped with Easy Start Technology for simpler pull starts to get the job done fast. The cushioned full-wrap handle and 3-point anti-vibration system makes this chainsaw balanced, maneuverable, and comfortable to operate. It features an adjustable automatic oiler, inertia-activated chain brake, and tool-free access to air filter and spark plug to enhance the design of the chainsaw. A heavy-duty carrying case and 2-cycle oil are included with purchase.
rnrn
rn
rnrn
$299.9942cc 2-Cycle 18 in Gas Chainsaw (S185)
rnrnThe S185 gas powered chainsaw features a 42cc full-crank high output engine to deliver steady power. The 18-in. low-kickback bar and chain goes through even the toughest wood quickly and easily. It is equipped with Easy Start technology for simpler pull starts to get the job done fast. The durable pro-grade chassis is engineered to withstand the most brutal and prolonged cutting tasks. The cushioned full wrap handle and 3-point anti-vibration system makes this chainsaw balanced, maneuverable, and comfortable to operate. Features such as the adjustable automatic oiler, inertia-activated chain brake, and tool-free access to air filter and spark plug enhance the design of the chainsaw. A heavy-duty carrying case and 2-cycle oil included with purchase.
rnrn
rn
rnrn
$329.991/2-in Drive 15-in Breaker Bar
rnrn1/2-in. Drive 15-in. Breaker Bar gives you the flexibility to get the job done easier and quicker. With the help of the breaker bar you can get the torque you need to get the job done with ease.
rnrn
rn
rnrn
$47.99Screw Extractor Set (3 pc)
rnrn3 pc. Screw Extractor Set is designed with a DoubleLok Technology™ ensuring both ends of the bit lock securely in impact drivers. Manufactured with M2 extra hardened high speed steel for maximum durability and long life.
rnrn
rn
rnrn
$17.99Screw Extractor Set (3 pc)
$17.992-in Phillips #2 Screwdriving Set (15 pc)
rnrn15 pc. 2-in. Phillips #2 Screwdriver Bit Set is engineered with shock-resistant tool steel provides maximum durability. The CNC-machined bit tip ensures a precise fit in each screw recess, helping to reduce wear, stripping and cam-out during wood and metal applications
rnrn
rn
rnrn
$6.99IMPACT READY™ Bolt Extractor Set (6 pc)
rnrn6 pc. IMPACT READY™ Bolt Extractor Set has reverse spiral flutes engineered to provide maximum gripping power to easily remove broken, damaged, or rusted nuts, bolts and screws.
rnrn
rn
rnrn
$29.99Impact Rated™ 2-in Torx 15 Screwdriving Bits (2 PK)
rnrnIMPACT RATED™ 2-in. Torx 15 Screwdriving Bits (2 pk.) are engineered to last longer than standard bits. The optimized torsion zone is designed for Impact Driver use, while each bit tip ensures a precise fit in each screw recess, helping to reduce wear, stripping and cam-out.
rnrn
rn
rnrn
$4.99Impact Rated™ 2-in Torx 25 Screwdriving Bits (2 PK)
rnrnIMPACT RATED™ 2-in. Torx 25 Screwdriving Bits (2 pk.) are engineered to last longer than standard bits. The optimized torsion zone is designed for Impact Driver use, while each bit tip ensures a precise fit in each screw recess, helping to reduce wear, stripping and cam-out.
rnrn
rn
rnrn
$4.99Impact Rated™ Nut Driver Set (3 pc)
rnrnrnFeatures
rn
- rn
- IMPACT RATED ™: Engineered to withstand the high torque output of an Impact Driver
- INDUSTRIAL STRENGTH: Industrial strength magnet maximizes fastener retention
- MINIMIZING METAL SHAVINGS: Recessed corners drive on flats minimizing metal shavings build up
rn
rn
rn
rn
rn
rnApplications
rn
- rn
- Wood
- Metal
rn
rn
rn
rn
rnIncludes
rn
- rn
- (1) 1/4-in. x 1-7/8-in. Nut Driver
- (1) 5/16-in. x 1-7/8-in. Nut Driver
- (1) 3/8-in. x 1-7/8-in. Nut Driver
rn
rn
rn
rn
rn
rn
rn
rn
rn
rnrnSupport
rn
rnrnrnrnNO LIMITED WARRANTY
rn
rnrn rn
rn
rn
rn
rnrnSERVICE
rn
rnrnrnrnrnWe take extensive measures to ensure all our products are made to the very highest standards and meet all relevant regulations.rnrnrn
rn
rn
rn
rn
rn
rn
rn
rn
rn
$13.99Impact Rated™ 5/16-in x 4-in Nut Driver
rnrnMPACT RATED™ 5/16-in. x 4-in. Nut Driver is engineered to withstand the high torque output of an Impact Driver. Featuring an industrial strength magnet which helps to maximize fastener retention, allowing users to complete fastening applications with precision placement. Our recessed corners drive fasteners on the flats, helping to minimize the buildup of metal shavings and reduce rounding of the hex head.
rnrn
rn
rnrn
$5.99Impact Rated™ 1/4-in x 4-in Nut Driver
rnrnIMPACT RATED™ 3/8-in. x 1-7/8-in. Nut Driver is engineered to withstand the high torque output of an Impact Driver. Featuring an industrial strength magnet which helps to maximize fastener retention, allowing users to complete fastening applications with precision placement.Our recessed corners drive fasteners on the flats, helping to minimize the buildup of metal shavings and reduce rounding of the hex head.
rnrn
rn
rnrn
$5.99Multi-Bits Jewelers Set (5 pc)
rnrnThe 5- pc. Multi-Bits Precision Jewelers Set has a small design making work in tight areas easy. Made from durable knurled, nickel-plated steel providing strength and a tempered-steel black oxide-coated finish keeps them from rusting.
rnrn
rn
rnrn
$6.99Precision Bi-Material Screwdriver Set (5 pc)
rnrn5 pc. Precision Bi-Material Screwdriver Sets has a black oxide coating that provides a more precise fit and reduced fastener stripping and cam-out. The polypropylene material, and ergonomic shape of the handle offers twisting force for three different applications; a speed-zone for quick rotation, a torque-zone for added grip in heavy torque applications, and a precision tactile zone for tasks requiring more rotation control.
rnrn
rn
rnrn
$15.9912-in-1 Precision Multi-Bit Screwdriver Set
rnrnDesigned for precision work, the 12-in-1 Precision Multi-Bit Screwdriver Set has a universal fit allowing you to lock all 1/4 in. hex bits and with the quick load locking system you can lock them with ease.
rnrn
rn
rnrn
$21.99Precision Multi-Bit Screwdriver Set (18 pc)
rnrnDesigned for precision work, the 18-in-1 Precision Multi-Bit Screwdriver Set features a durable 5-in. aluminum handle. Stay organized with the on-board storage rack, keeping all your bits in one place.
rnrn
rn
rnrn
$11.99Multi-Bits Screwdriver (6 pc)
rnrnThe 6 pc. Multi-Bits Screwdriver has a convenient space-saving design with 6 bits stored right in the handle. The polypropylene material and ergonomic shape of the handle offers twisting force for three different applications—a speed zone for quick rotation, a torque zone for added grip in heavy-torque applications, and a precision tactile zone for tasks requiring more rotation control. A chrome-plated bar resists corrosion.
rnrn
rn
rnrn
$11.99Quick Change Push & Pick Multi-Bit Screwdriver
rnrnIncrease productivity with this Quick Change Push & Pick Multi-Bit Screwdriver. The ergonomic shape of the handle offers twisting force for three different applications; a speed-zone for quick rotation, a torque-zone for added grip in heavy torque applications, and a precision tactile zone for tasks requiring more rotation control.
rnrn
rn
rnrn
$15.99Straight Long Cut Aviation Snips
rnrnSnips are designed to cut various thicknesses of stainless and cold-rolled steel. Offset blade models help keep material away from hands while cutting. All models feature an auto-release mechanism for fast one-handed operation. Large handle rings and double dipped grips on the Tin Snips are designed for more comfortable use. Snip models include; offset long-nose, duckbill, 3-piece aviation set, offset left-cut, offset right-cut, straight-cut, right-cut aviation, left-cut aviation, straight-cut aviation, and 10 in. and 12 in. tin snips.
rnrn
rn
rnrn
$21.99