• Belt

    rn

    rnrnrnrnrnrn

    Dayco® engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid-reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems.rnrnFeatures & Benefits:rn

      • rn

      • Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.

    rn

      • Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys

    rn

      • No-Noise Advanced Design EPDM rubber compound for quiet extended life

    rn

      • Air Conditioning, Alternator and Water Pump; w/ Air Conditioning

    rn

    rn

    Belt

    $18.99
  • TIMING BELT

    rn

    rnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrn

    ATTRIBUTES SPECIFICATIONS
    Effective Length (mm) 1229
    No. of Teeth 129
    Construction Type Std Temp and Load
    Tooth Profile Round Tooth
    Timing Marks N
    Tooth Pitch (mm) 9.53
    Top Width (mm) 22

    rn

    rn

    rn

  • Heater Hose

    nn

    Dayco Molded Heater Hose

    nn

    nn

    nn

    nn

    nn

    nnnnMade with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.nnnnThe Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684.  With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.nnnn

    nn

  • Heater Hose

    nn

    Dayco Molded Heater Hose

    nn

    nn

    nn

    nn

    nn

    nnnnMade with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.nnnnThe Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684.  With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.nnnn

    nn

  • Curved Radiator Hose

    nn

    Dayco Molded Radiator and By-Pass Hose

    nn

    nn

    nn

    nn

    nn

    nnnnDesigned to replace OEM hoses on today’s light duty vehicles for superior performance.nnnnThe Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.nnnn

    nn

  • Curved Radiator Hose

    nn

    Dayco Molded Radiator and By-Pass Hose

    nn

    nn

    nn

    nn

    nn

    nnnnDesigned to replace OEM hoses on today’s light duty vehicles for superior performance.nnnnThe Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.nnnn

    nn

  • Drum Brake Shoe

    nn

    Wagner® brake shoes utilize OE-matched friction materials for optimal brake performance and precision-ground materials to maximize friction-to-drum contact.

    nnnn

      nn

    • OPTIMAL BRAKING PERFORMANCE — OE-matched friction material for optimal brake performance
    • nn

    • MAXIMIZES FRICTION-TO-DRUM CONTACT — Precision ground material maximizes friction-to-drum contact
    • nn

    • MATCHES OE DESIGN –Attached levers and pins included to match OE (on specific applications)
    • nn

    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • nn

    • HARDWARE INCLUDED — Attached levers and pins to match OE are included on select applications
    • nn

  • Engine Timing Belt Tensioner Pulley

    rnrn rnrnEngineered for all automotive applications that require a timing belt.rnrnDesigned to absorb changes in loss of timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt. Maintaining belt tension at a constant level reduces noise, prevents belt flapping, and ensures proper timing effectiveness throughout the entire service life of the belt. This Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.rnrn 

  • Silicone Gasket Maker

    nnnn nn

    Dynatex® DynaGrey® is a low odor, sensor safe, non-corrosive silicone gasketing compound. Designed for high torque applications. Remains flexible through thermal cycling and provides excellent resistance to oil, water and anti-freeze/coolant. Temperature range -85° to 500°F.

    nn

    nn

      • nn

      • Oil resistant

    nn

      • Manufactured to meet OEM specs

    nn

      • O² sensor safe

    nn

      • Low odor

    nn

      • Non-corrosive

    nn

      • Fast curing

    nn

      • Will not leak

    nn

    nn

  • Radiator Hose

    nnnn nnnnDesigned to replace OEM hoses on today’s light duty vehicles for superior performance.nnnnThe Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.

  • Curved Radiator Hose

    nnnn nnnnDesigned as an aftermarket replacement for OEM manufactured branched cooling system hoses.nnnnThe Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J1684.

Main Menu