-
-
Engine Intake Manifold Gasket Set
rnrn rnrnWe offer you sealing products and other components Ajusa designed to ensure that your engine runs smoothly. In our catalog, you will find a wide selection of gaskets for different parts of the engine, such as the water pump, EGR valve, brake compressor, thermostat, among others.$9.99 -
Engine Water Pump
rnrn
rnrn rnrnAll mechanical GMB water pumps meet or exceed OEM standards for performance and durability.rn-
- rn
- Whether the housing is made of cast iron, aluminum, or stamped steel, our tight manufacturing tolerances make installation simple and trouble-free.
rn
-
- Cooling is maximized with our precision-formed impellers and tested to meet or exceed OEM flow rate specifications at various RPMs.
rn
-
- Our proprietary shaft seal design withstands wear, preventing leaks and maximizing longevity.
rn
-
- Our genuine GMB steel bearings are made from top-quality materials.
rn
rnWater pump failures can cause catastrophic damage to an engine; we make sure every GMB Water Pump will meet or exceed OEM specifications. And because we manufacture every water pump to tight tolerances, our dimensions are accurate, and installation is easy (easy installation is essential, as it prevents many of the issues that lead to leaks and premature failure).rnrnWhen it’s time to replace the water pump in your vehicle, it makes sense to go with a reliable, top-quality replacement from GMB.
$51.99Engine Water Pump
$51.99 -
-
Radiator
rnrnCSF factories are ISO/TSO certified;CSF Radiators are designed and built to High Performance Standards & sold worldwide for over 50 years – over 30 Million Units Sold!;Our Radiators are carefully engineered & Wind Tunnel Tested in labratory for Cooling Performance Validation;We have over 10,000 different models of Radiators that we manufacture & supply for all the leading brands of vehicles on the roadrn-
- rn
- OEM specified Plastic Tank-Aluminum Core Construction
rn
-
- Tanks are made from Virgin Grade Engineered plastic resins, which are “Glass Filled” for added Strength & Durability
rn
-
- Gaskets are made from Special Grade “EPDM” rubber to withstand extreme temperatures of up to -120 Degrees F
rn
-
- Tubes – Welded Type or Latest Generation “B-Tube” Design
rn
-
- Fins (Heart of Radiator) – High Performance “Multi-Louvered Design” – OEM Spec
rn
-
- 100% leak tested before leaving factory at 150% of operating pressure
rn
-
- Industry Best Packaging – “10 Foot Drop Test” Standard
rn
-
- Drop-in Fit
rn
-
- High Performance Transmission Cooler with special Built-in Turburlator, when applicable
rn
-
- All components are installed, torqued, & tested on Radiator during assembly
rn
-
-
-
Timing Belt
rnrnCR Grade (A-Type)rnrn* “MADE IN JAPAN”.rn* Manufactured by the top power transmission beltrnmanufacturer in Japan.rn(Certified ISO/TS16949, ISO9001:2008, JIS-Q9001:2008).rn* Extensive range for Japanese and Korean applications.rn* Compatible to O.E. tooth profiles for optimum engine performance.rn* Various grades chosen for the engine specifications / sensitivity.rn* Competitive price.$29.99Timing Belt
$29.99 -
Crankshaft Seal
rnrnEstablished in 1972, AJUSA (pronounced ahh-hoo-suh) is a leading international manufacturer of automotive gaskets/sets, cylinder head bolt sets, seals, hydraulic lifters, camshafts, and turbo components.rn-
- rn
- Manufactured in Spain, AJUSA specializes in coverage for European and Asian applications, especially late model vehicles.
rn
-
- AJUSA products are made to the highest quality standards and distributed in over 70 countries. They hold AENOR certificates as per the ISO 9001 and IATF 16949 standards.
rn
-
- They minimize their environmental impact through energy savings and the use of renewable energies, holding energy certificates from SGS ISO 14001 standard and over 8,000 solar panels generate 40% of their annual power consumption at their production plant.
rn
$6.00Crankshaft Seal
$6.00 -
-
Radiator
rnrn
rn1 Row Plastic Tank Aluminum Core
rnRadiatorrnrnCSF factories are ISO/TSO certified;CSF Radiators are designed and built to High Performance Standards & sold worldwide for over 50 years – over 30 Million Units Sold!;Our Radiators are carefully engineered & Wind Tunnel Tested in labratory for Cooling Performance Validation;We have over 10,000 different models of Radiators that we manufacture & supply for all the leading brands of vehicles on the roadrn
-
- rn
- OEM specified Plastic Tank-Aluminum Core Construction
rn
-
- Tanks are made from Virgin Grade Engineered plastic resins, which are “Glass Filled” for added Strength & Durability
rn
-
- Gaskets are made from Special Grade “EPDM” rubber to withstand extreme temperatures of up to -120 Degrees F
rn
-
- Tubes – Welded Type or Latest Generation “B-Tube” Design
rn
-
- Fins (Heart of Radiator) – High Performance “Multi-Louvered Design” – OEM Spec
rn
-
- 100% leak tested before leaving factory at 150% of operating pressure
rn
-
- Industry Best Packaging – “10 Foot Drop Test” Standard
rn
-
- Drop-in Fit
rn
-
- High Performance Transmission Cooler with special Built-in Turburlator, when applicable
rn
-
- All components are installed, torqued, & tested on Radiator during assembly
rn
-
-
Water Pump
rnrn
rnrn
rn
High-Strength Steel Bearing
rn
rn
rn
rn
rn
rnrnGMB has manufactured bearings for over 75 years in the global market for both the OEM and aftermarket industries. GMB has studied all aspects of bearing manufacturing to design the highest-quality bearings with proper high-grade steel, precision bearing race machining and polishing, and proper grease selection. GMB uses roller bearings for all high-load applications.rn
rn
rn
Proprietary Formulated Mechanical Seal
rn
rn
rn
rn
rn
rnrnGMB Mechanical Shaft Seals are made with proprietary elastomers and agents for protection and sealing power. GMB Shaft Seals utilize carbon and ceramic sealing surfaces for superior wear resistance.rn
rn
rn
Precision OEM-Spec Water Pump Housing
rn
rn
rn
rn
rn
rnrnGMB Water Pump Housings are manufactured to match the exact OEM-spec materials (cast iron, aluminum, or stamped steel). Each housing is precision measured using state-of-the-art technology to be dimensionally correct up to a 99% accuracy with strict tolerance limits.rn
rn
rn
Precision-Formed Impeller
rn
rn
rn
rn
rn
rnrnGMB Water Pump Impellers are manufactured to match the exact OEM-spec materials (metal or polymer composite) based specifically on the OEM design. Each impeller is also precision measured to be dimensionally correct up to a 99% accuracy with strict tolerance limits.rnrn rnrnrn
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn
$33.99Water Pump
$33.99 -
Wheel Bearing and Hub Assembly
rnrn
rn
High Grade Steel Bearings
rn
rn
rn
rn
rn
rnrnGMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.rn
rn
rn
Roll Formed High-Grade Steel Hub
rn
rn
rn
rn
rn
rnrnGMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!rn
rn
rn
Specially Formulated Bearing Grease
rn
rn
rn
rn
rn
rnrnGMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.rn
rn
rn
Triple & Quadruple Lip Sealing
rn
rn
rn
rn
rn
rnrnGMB Hub Bearing Assemblies use a triple and quadruple lip sealing technology. This technique uses high temperature resistant rubber to achieve maximum bearing protection against dust, water and road debris.rnrnrn
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn
$61.99 -
RADIATOR
Radiator
CSF factories are ISO/TSO certified;CSF Radiators are designed and built to High Performance Standards & sold worldwide for over 50 years – over 30 Million Units Sold!;Our Radiators are carefully engineered & Wind Tunnel Tested in labratory for Cooling Performance Validation;We have over 10,000 different models of Radiators that we manufacture & supply for all the leading brands of vehicles on the road
- OEM specified Plastic Tank-Aluminum Core Construction
- Tanks are made from Virgin Grade Engineered plastic resins, which are “Glass Filled” for added Strength & Durability
- Gaskets are made from Special Grade “EPDM” rubber to withstand extreme temperatures of up to -120 Degrees F
- Tubes – Welded Type or Latest Generation “B-Tube” Design
- Fins (Heart of Radiator) – High Performance “Multi-Louvered Design” – OEM Spec
- 100% leak tested before leaving factory at 150% of operating pressure
- Industry Best Packaging – “10 Foot Drop Test” Standard
- Drop-in Fit
- High Performance Transmission Cooler with special Built-in Turburlator, when applicable
- All components are installed, torqued, & tested on Radiator during assembly
Shop By Department
- Arts,crafts & sewing
- Auto Body Parts
- Auto Parts
- Belt Drive
- Brake & Wheel Hub
- Cooling System
- Drivetrain
- Electrical
- Electrical-Bulb-Socket
- Electrical-Connector
- Electrical-Swich & Relay
- Engine
- Exhaust & Emission
- Filter & Air Hose
- Fuel System
- Ignition
- Oils & Fluids
- Steering
- Suspension
- Tires & Wheels
- Transmission-Automatic
- Transmission-Manual
- Wiper & Washer
- Babies & Moms
- Beauty & Personal Care
- Body & Soap Making Supplies
- Books & Office
- Hot Promotions
- Cars & Motocycles
- Clothing & Apparel
- Consumer Electrics
- Computers & Technologies
- Grocery
- Home Improments
- Home, Garden & Kitchen
- Health & Beauty
- Jewelry & Watches
- Pets Store
- Phones & Accessories
- Tools
- Sport & Outdoor
- Vouchers & Services
- Wall ,Table Art & Gallery
