ADVICS
Molded Heater Hose
Dayco Small I.D. Molded Heater Hose
Designed to replace OEM coolant hose and provide long, reliable service in applications where molded hoses in small diameters are required.
Made with the same bends and routing as the OEM assembly, this molded hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation. In addition to meeting SAE J20R3, Class D-1 requirements, the Dayco small I.D. molded heater hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
$7.99Molded Heater Hose
$7.99
Lower Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$14.99Lower Radiator Hose
$14.99
Curved Radiator Hose
Capable of withstanding extreme temperatures and high-pressure environments, all Dayco coolant hoses are designed to meet OE specifications as well as all relevant SAE standards.
$4.99Curved Radiator Hose
$4.99
Wheel Bearing and Hub Assembly
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
$42.99
Fully Synthetic Motor Oil 0W-20
AISIN greenTECH+ Motor Oil is formulated with VHVI base oils, high performance additive systems and leading edge viscosity index improver, which meet the requirement of current advanced top-tier engine oil grade of API SP and ILSAC GF-6A and GF-6B. It is optimized to provide complete engine oil performance, especially fuel efficiency, through friction reduction and enhanced durability.
greenTECH+
- For Gasoline (and Diesel) engine application equipped with T-GDI, GDI, DOHC, EFI and VVT features
- Prevention & Protection of LSPI (Low Speed Pre-Ignition) phenomena for T-GDI engines
- For Gasoline (and Diesel) engines equipped with T-GDI, GDI, DOHC, EFI and VVT features
- Prevention and protection of LSPJ (low speed pre-ignition) phenomenon for T-GDI engines
$9.99
Transmission Clutch Kit
AISIN Clutch Kits are produced using AISIN OE equipment technology, to the same exacting tolerances and quality standards. Each Kit contains precision components that are built to deliver improved drivetrain efficiency with faithful power transfer. With an AISIN Clutch Kit, drivers enjoy precise pedal control for a more confident and smoother driving experience.
- Kit Includes: AISIN Clutch Cover & Disc, Release Bearing, Pilot Bearing (if required), & Alignment Tool
- Maintains optimal drivetrain efficiency
- OE quality bearing(s) and vehicle specific alignment tool included for trouble-free installation
$130.99Transmission Clutch Kit
$130.99
Heater Hose
Dayco Molded Heater Hose
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$19.99Heater Hose
$19.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$16.99Curved Radiator Hose
$16.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$24.99Curved Radiator Hose
$24.99
Disc Brake Pad Set
ULTRA-PREMIUM BRAKE PADS
For three decades, ADVICS ultra-premium braking and chassis components have set the standard of excellence in the aftermarket. ADVICS ultra-premium disc brake pads are developed from advanced ceramic friction technology. Master engineering results in the aftermarket’s best performing ceramic brake pads that provides superior stopping power and peak performance capabilities.
$35.99Disc Brake Pad Set
$35.99
Engine Water Pump
- 100% factory tested for leakage and dimensional precision
- Bearing noise and durability-tested
- Designed to match OE coolant flow rate and pressure
$40.99Engine Water Pump
$40.99
Water Pump
AISIN takes pride in being the No. 1 water pump supplier to Japanese automobile manufactures. Utilizing the experience and knowledge gained throughout the years of cooperation directly with automotive manufacturers, AISIN is able to employ a technological advantage in manufacturing and supplying the best in quality and the most durable of products. With this momentum, AISIN is increasing the development, manufacturing and supply for European and American automobile manufacturers.
- AISIN Water Pumps are engineered to provide reliable and efficient cooling to the engine, by circulating coolant throughout the engine block, while also being durable enough to withstand the rigors of daily use and high mileage.
- AISIN Water Pumps are an essential component of the engine’s cooling system. They are responsible for circulating coolant throughout the engine block, which helps to keep the engine running at the proper temperature. AISIN manufactures high-quality OE water pumps that are designed to provide reliable and efficient cooling to the engine. They are engineered to withstand the rigors of daily use and high mileage, ensuring that the engine runs at the proper temperature even under heavy loads or high-performance driving conditions.
- In addition to providing reliable and efficient cooling, AISIN water pumps also help extend the life of the engine by preventing overheating and any possible damage caused by high temperatures. They are also designed to operate quietly and be low maintenance.
$42.95Water Pump
$42.95
Poly Rib Belt
Designed to provide full coverage for today’s light duty vehicle market, especially vehicles with troublesome drives.
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Dayco Poly-V serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperature.
$29.99Poly Rib Belt
$29.99
Accessory Drive Belt
Where the rubber meets the road in testing, research, development and materials science. Dayco has been developing OE quality belts since the early 1970s. And, throughout the years, our scientists and researchers have worked meticulously to invent new belt technologies with unique chemistries and materials for a range of drive system designs and applications. We utilize the highest quality rubber, EPDM, polymer compounds, carbon fibers, aramid and more, so that our belts provide longer lasting performance, excellent temperature resistance, less slippage and reduced noise and vibration. And as our designs continue evolving, we bring to market more coverage and applications across different market segments which meet ever-changing performance and environmental requirements.
$16.99Accessory Drive Belt
$16.99
Engine Timing Belt Tensioner Pulley
Engineered for all automotive applications that require a timing belt.
Designed to absorb changes in loss of timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt. Maintaining belt tension at a constant level reduces noise, prevents belt flapping, and ensures proper timing effectiveness throughout the entire service life of the belt. This Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.
$33.99
Silicone Gasket Maker
Dynatex® DynaGrey® is a low odor, sensor safe, non-corrosive silicone gasketing compound. Designed for high torque applications. Remains flexible through thermal cycling and provides excellent resistance to oil, water and anti-freeze/coolant. Temperature range -85° to 500°F.- Oil resistant
- Manufactured to meet OEM specs
- O² sensor safe
- Low odor
- Non-corrosive
- Fast curing
- Will not leak
$4.99Silicone Gasket Maker
$4.99
Clutch Slave Cylinder
AISIN Clutch Hydraulics are a mechanical system used in vehicles with manual transmissions. They use fluid pressure to engage and disengage the clutch, providing a smooth and consistent operation of the clutch pedal. These systems consist of a master cylinder, which is connected to the clutch pedal, and a slave cylinder, which is connected to the clutch itself. When the driver presses the clutch pedal, the master cylinder pushes fluid through a hose to the slave cylinder, which then pushes the clutch in or out. This allows for smooth and consistent engagement and disengagement off the clutch, providing the driver with a more responsive and comfortable driving experience.
AISIN’s original equipment technology and know-how is applied to design and engineer hydraulics. Each part is manufactured vehicle specific, ensuring product quality and reliability
- Precision honing of hydraulic cylinders monitored under OE quality control standards
- Anodizing and “Kanigen” plating of cylinder bodies strengthens surface, ensuring smooth operation of the piston, and resists corrosion
- Quick response design reacts to driver’s clutch and brake
- Heat resistant and extended life Ethylene Propylene Rubber Seals prevent leakage
$34.99Clutch Slave Cylinder
$34.99Clutch Master Cylinder
AISIN Clutch Hydraulics are a mechanical system used in vehicles with manual transmissions. They use fluid pressure to engage and disengage the clutch, providing a smooth and consistent operation of the clutch pedal. These systems consist of a master cylinder, which is connected to the clutch pedal, and a slave cylinder, which is connected to the clutch itself. When the driver presses the clutch pedal, the master cylinder pushes fluid through a hose to the slave cylinder, which then pushes the clutch in or out. This allows for smooth and consistent engagement and disengagement off the clutch, providing the driver with a more responsive and comfortable driving experience.
AISIN’s original equipment technology and know-how is applied to design and engineer hydraulics. Each part is manufactured vehicle specific, ensuring product quality and reliability
- Precision honing of hydraulic cylinders monitored under OE quality control standards
- Anodizing and “Kanigen” plating of cylinder bodies strengthens surface, ensuring smooth operation of the piston, and resists corrosion
- Quick response design reacts to driver’s clutch and brake
- Heat resistant and extended life Ethylene Propylene Rubber Seals prevent leakage
$59.99Clutch Master Cylinder
$59.99
Hose Water
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$11.99Hose Water
$11.99
Radiator Lower Hose
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40˚F (-40˚C) to +257˚F (+125˚C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
$19.99Radiator Lower Hose
$19.99
Engine Timing Belt Idler
When working with Serpentine and Timing Belts, Tensioners and Idler Bearings are vital to ensure proper engine performance. In some situations, a Tensioner or Idler Bearing is a critical component in protecting your engine from severe damage and catastrophic failure. GMB Tensioner and Idler Bearings features include:
- Rigorous testing and quality control for all bearing components.
- Built to withstand High-Performance use and optimal operation.
- Triple-Lip seal design to maximize grease retention and prevent contamination.
- Precise tolerances for easy installation.
It’s never a good idea to compromise on the quality of Belt Tensioners and Idler Bearings. GMB is known for Global OEM Manufacturing technology, and our proprietary designs ensure your parts are built to last.
$12.99Engine Timing Belt Idler
$12.99
Small I.D. Heater Hose
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$22.99Small I.D. Heater Hose
$22.99
Idler/Tensioner Pulley
Dayco Heavy-Duty Idler/Tensioner Pulley
Engineered for the demanding drive systems of today’s heavy-duty commercial trucks, class 4-8.
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco heavy-duty idler/tensioner pulleys are machined from high strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
$31.99Idler/Tensioner Pulley
$31.99
Idler/Tensioner Pulley
Dayco Heavy-Duty Idler/Tensioner Pulley
Engineered for the demanding drive systems of today’s heavy-duty commercial trucks, class 4-8.
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco heavy-duty idler/tensioner pulleys are machined from high strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
$49.99Idler/Tensioner Pulley
$49.99
Automatic Belt Tensioner
Specially engineered to address installation issues for over half a million Detroit Diesel 13 and 15 series engine applications.
The Dayco heavy-duty 2-piece tensioner was designed with an outer and inner tensioner that cuts the installation time in half compared to competitive products. Machined from high strength steel or powdered metal to provide excellent wear resistance under harsh environments, this unique 2-piece design also features Dayco’s patented flat spring technology and dual pressed-in pulley bearings to provide long bearing life and protection against the shock loads.
$96.99Automatic Belt Tensioner
$96.99
Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J168
$15.99Curved Radiator Hose
$15.99
Small I.D. Heater Hose
Designed to replace OEM coolant hose and provide long, reliable service in applications where molded hoses in small diameters are required.
Made with the same bends and routing as the OEM assembly, this molded hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation. In addition to meeting SAE J20R3, Class D-1 requirements, the Dayco small I.D. molded heater hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
$9.99Small I.D. Heater Hose
$9.99
Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$39.99Wheel Bearing
$39.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$17.99Radiator Hose
$17.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$17.99Radiator Hose
$17.99
Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J1684.
$15.99Curved Radiator Hose
$15.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$38.99Radiator Hose
$38.99
Belt Drive
Where the rubber meets the road in testing, research, development and materials science. Dayco has been developing OE quality belts since the early 1970s. And, throughout the years, our scientists and researchers have worked meticulously to invent new belt technologies with unique chemistries and materials for a range of drive system designs and applications. We utilize the highest quality rubber, EPDM, polymer compounds, carbon fibers, aramid and more, so that our belts provide longer lasting performance, excellent temperature resistance, less slippage and reduced noise and vibration. And as our designs continue evolving, we bring to market more coverage and applications across different market segments which meet ever-changing performance and environmental requirements.
$44.99Belt Drive
$44.99
Engine Water Pump
AISIN takes pride in being the No. 1 water pump supplier to Japanese automobile manufactures. Utilizing the experience and knowledge gained throughout the years of cooperation directly with automotive manufacturers, AISIN is able to employ a technological advantage in manufacturing and supplying the best in quality and the most durable of products. With this momentum, AISIN is increasing the development, manufacturing and supply for European and American automobile manufacturers.
- AISIN Water Pumps are engineered to provide reliable and efficient cooling to the engine, by circulating coolant throughout the engine block, while also being durable enough to withstand the rigors of daily use and high mileage.
- AISIN Water Pumps are an essential component of the engine’s cooling system. They are responsible for circulating coolant throughout the engine block, which helps to keep the engine running at the proper temperature. AISIN manufactures high-quality OE water pumps that are designed to provide reliable and efficient cooling to the engine. They are engineered to withstand the rigors of daily use and high mileage, ensuring that the engine runs at the proper temperature even under heavy loads or high-performance driving conditions.
- In addition to providing reliable and efficient cooling, AISIN water pumps also help extend the life of the engine by preventing overheating and any possible damage caused by high temperatures. They are also designed to operate quietly and be low maintenance.
$39.99Engine Water Pump
$39.99Engine Water Pump
All mechanical GMB water pumps meet or exceed OEM standards for performance and durability.
- Whether the housing is made of cast iron, aluminum, or stamped steel, our tight manufacturing tolerances make installation simple and trouble-free.
- Cooling is maximized with our precision-formed impellers and tested to meet or exceed OEM flow rate specifications at various RPMs.
- Our proprietary shaft seal design withstands wear, preventing leaks and maximizing longevity.
- Our genuine GMB steel bearings are made from top-quality materials.
Water pump failures can cause catastrophic damage to an engine; we make sure every GMB Water Pump will meet or exceed OEM specifications. And because we manufacture every water pump to tight tolerances, our dimensions are accurate, and installation is easy (easy installation is essential, as it prevents many of the issues that lead to leaks and premature failure).
When it’s time to replace the water pump in your vehicle, it makes sense to go with a reliable, top-quality replacement from GMB.
$33.99Engine Water Pump
$33.99
Wheel Bearing Collar
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$20.00Wheel Bearing Collar
$20.00
4 MINUTE CLEAR EPOXY
Dynatex® 4 Minute Clear Epoxy is an industrial grade adhesive that permanently bonds and repairs with a working time of 60 minutes. It chemically welds, fills and seals most metals. It has an extended pot life for prolonged handling time. Repairs steel, iron, brass and copper while being resistant to gasoline, anti-freeze and most solvents. It can be drilled, threaded and machined once fully cured.- Excellent chemical resistance
- Good heat resistance
- Excellent adhesion
- Outstanding versatility
- Bond rigid materials including: aluminum, chrome, copper, Iron, steel, stainless steel and zinc
$3.994 MINUTE CLEAR EPOXY
$3.99
