No products in the cart.
THERMOSTAT HOUSING
rnrn
rnrnThermostat HousingrnFeatures:rnMade from high quality materials to maintain proper cooling of your engine and prevent overheatingrnEngineered to meet or exceed OE standardsrnHeavy cast OE style constructionrnQuality machined threaded portsrnCorrosion and rust inhibitor coatedrnProducts are engineered and tested to provide years of trouble free operationrnrnAttention California Customers – Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.govrnrnAlternate/OEM Part Number(s): F57Z8592AB, F5TZ8592AArnrnSKP Warranty Information:rn12 Months$24.99THERMOSTAT HOUSING
$24.99Thermostat
rnrn
THERMOSTAT-192 DEGREES W/ SEAL
rn
rn
rnrnManufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicablernrnrn207-192rnTHERMOSTAT-192 DEGREESrnManufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
$12.99Thermostat
$12.99Radiator Fan Assembly
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.Features & Benefits:rnIdeal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles Complete package – assembly is designed with the same materials and components as the original part Quality assured – motors are tested in laboratory settings to ensure performancernCost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
$139.99Radiator Fan Assembly
$139.99Water Pump
rnrnrnrnrnrnrn
GMB knows water pumps inside and out. Drawing on decades of water pump manufacturing and engineering experience, each water pump is manufactured to strict OEM specifications of quality, design, and fitment to ensure a high-quality finished product that is made to last. In fact, GMB provides water pumps to OE car makers including Hyundai, Kia, GM, and Chrysler. Enjoy the perks of having an OEM-quality water pump in your vehicle without the high price tag!rnrnFeatures & Benefits:rn - rn
- 100% factory tested for leakage and dimensional precision
rn
- Designed to match OE coolant flow rate and pressure
rn
- Built with high-quality GMB bearings
rn
- Bearings are noise and durability tested
rn
- Built with exact OEM dimensions
rn
- Includes all required hardware for installation
rn
rn
rn
Additional Resourcesrn
rnrnrnrnrnrn
Alternate/OEM Part Number(s): 89284814, E37E8505AA, E3BZ8501A, E3TZ8501A, E4BZ8501A, E6ZZ8501A, ZZM015010, ZZMO15010 $39.99Water Pump
$39.99Radiator Fan Assembly
Radiator Fan Assembly for Toyota Corolla and Matrix (2003-2008)
Keep your vehicle’s cooling system in optimal condition with this high-quality Radiator Fan Assembly by Chin Lang. Designed for precise fitment and reliable performance.
- Brand: Chin Lang
- SKU: 16711-0D071
- Compatibility: Toyota Corolla (2003-2008) and Toyota Matrix (2003-2008), base, LE, S, XR models (excluding XRS).
- Condition: New
- Function: Direct replacement for efficient engine cooling.
$81.99Radiator Fan Assembly
$81.99Engine Coolant Thermostat Housing
rnrnThis replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.rn- rn
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
rn
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
rn
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
rn
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
rn
$11.99Curved Radiator Hose
nnDayco Molded Radiator and By-Pass Hose
nn
nn
nn
nn
nn
nnnnDesigned to replace OEM hoses on today’s light duty vehicles for superior performance.nnnnThe Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.nnnnnn
$16.99Curved Radiator Hose
$16.99Curved Radiator Hose
nnDayco Molded Radiator and By-Pass Hose
nn
nn
nn
nn
nn
nnnnDesigned to replace OEM hoses on today’s light duty vehicles for superior performance.nnnnThe Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.nnnnnn
$24.99Curved Radiator Hose
$24.99Engine Water Pump
rnrn rn- rn
- 100% factory tested for leakage and dimensional precision
rn
- Bearing noise and durability-tested
rn
- Designed to match OE coolant flow rate and pressure
rn
$40.99Engine Water Pump
$40.99Radiator: With Transmission Oil Cooler
nnWarranty Details (LIMITED LIFETIME REPLACEMENT)nn
nnnnCarquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.nnnnProduct Features:nn
- nn
- Thermal tested under real-life temperature simulations
nn
- High tensile strength aluminum for maximum crimp strength
nn
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
nn
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
nn
- Oil cooler designs meet or exceed OE standards, keeping the vehicles engine and transmission performing at optimal conditions
nn
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
nn
nn
$200.00Hose Water (Lower)
nnnn nnOur molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
nnnn
- nn
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
nn
- Pre-shaped to fit and to ensure perfectly sealed conditions.
nn
- Aramid or rayon knit reinforcement (depending on the application).
nn
$25.99Hose Water (Lower)
$25.99Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$21.99Radiator Hose
$21.99Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J1684.
$21.99Curved Radiator Hose
$21.99Radiator Lower Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$21.99Radiator Lower Hose
$21.99Radiator Hose
nnnn nnnn nnnnDesigned to replace OEM hoses on today’s light duty vehicles for superior performance.nnnnThe Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.$38.99Radiator Hose
$38.99Engine Coolant Thermostat Housing Assembly
rnrnThis replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.rn- rn
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
rn
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
rn
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
rn
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
rn
$67.99Engine Water Pump
nnnnAll mechanical GMB water pumps meet or exceed OEM standards for performance and durability.nn- nn
- Whether the housing is made of cast iron, aluminum, or stamped steel, our tight manufacturing tolerances make installation simple and trouble-free.
nn
- Cooling is maximized with our precision-formed impellers and tested to meet or exceed OEM flow rate specifications at various RPMs.
nn
- Our proprietary shaft seal design withstands wear, preventing leaks and maximizing longevity.
nn
- Our genuine GMB steel bearings are made from top-quality materials.
nn
nnWater pump failures can cause catastrophic damage to an engine; we make sure every GMB Water Pump will meet or exceed OEM specifications. And because we manufacture every water pump to tight tolerances, our dimensions are accurate, and installation is easy (easy installation is essential, as it prevents many of the issues that lead to leaks and premature failure).nnnnWhen it’s time to replace the water pump in your vehicle, it makes sense to go with a reliable, top-quality replacement from GMB.
$33.99Engine Water Pump
$33.99Water Pump
nnnn
nn
High-Strength Steel Bearing
nn
nn
nn
nn
nn
nnnnGMB has manufactured bearings for over 75 years in the global market for both the OEM and aftermarket industries. GMB has studied all aspects of bearing manufacturing to design the highest-quality bearings with proper high-grade steel, precision bearing race machining and polishing, and proper grease selection. GMB uses roller bearings for all high-load applications.nn
nn
nn
Proprietary Formulated Mechanical Seal
nn
nn
nn
nn
nn
nnnnGMB Mechanical Shaft Seals are made with proprietary elastomers and agents for protection and sealing power. GMB Shaft Seals utilize carbon and ceramic sealing surfaces for superior wear resistance.nn
nn
nn
Precision OEM-Spec Water Pump Housing
nn
nn
nn
nn
nn
nnnnGMB Water Pump Housings are manufactured to match the exact OEM-spec materials (cast iron, aluminum, or stamped steel). Each housing is precision measured using state-of-the-art technology to be dimensionally correct up to a 99% accuracy with strict tolerance limits.nnnnnn
nn
nn
nn
nn
nn
nn
nn
nn
Engine Water Pump 170-1810 GMB
High-Strength Steel Bearing
GMB has manufactured bearings for over 75 years in the global market for both the OEM and aftermarket industries. GMB has studied all aspects of bearing manufacturing to design the highest-quality bearings with proper high-grade steel, precision bearing race machining and polishing, and proper grease selection. GMB uses roller bearings for all high-load applications.
Proprietary Formulated Mechanical Seal
GMB Mechanical Shaft Seals are made with proprietary elastomers and agents for protection and sealing power. GMB Shaft Seals utilize carbon and ceramic sealing surfaces for superior wear resistance.nn
Precision OEM-Spec Water Pump Housing
GMB Water Pump Housings are manufactured to match the exact OEM-spec materials (cast iron, aluminum, or stamped steel). Each housing is precision measured using state-of-the-art technology to be dimensionally correct up to a 99% accuracy with strict tolerance limits.
Precision-Formed Impeller
GMB Water Pump Impellers are manufactured to match the exact OEM-spec materials (metal or polymer composite) based specifically on the OEM design. Each impeller is also precision measured to be dimensionally correct up to a 99% accuracy with strict tolerance limits.$39.99
Additional Resources
rnrnThis replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.rn
nn
rnrn rn
nn
nnnn nn
nnnn nnnn nnnnDesigned to replace OEM hoses on today’s light duty vehicles for superior performance.nnnnThe Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
