No products in the cart.
Aubos
Wheel Bearing and Hub Assembly
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
$42.99
Engine Water Pump
- 100% factory tested for leakage and dimensional precision
- Bearing noise and durability-tested
- Designed to match OE coolant flow rate and pressure
$40.99Engine Water Pump
$40.99
Drum Brake Shoe
Advanced Friction Formulations Exceptional Stopping Power Superior Braking Performance You Catvn Depend On
Hardware Included And Pre-Attached Where Applicable Bonded Or Riveted, Precision Manufacturing
$24.99Drum Brake Shoe
$24.99
Carquest Premium Alternator: Remanufactured
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
$204.99
Radiator: With Transmission Oil Cooler
Warranty Details (LIMITED LIFETIME REPLACEMENT)Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicles engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
$200.00
Engine Timing Belt Idler
When working with Serpentine and Timing Belts, Tensioners and Idler Bearings are vital to ensure proper engine performance. In some situations, a Tensioner or Idler Bearing is a critical component in protecting your engine from severe damage and catastrophic failure. GMB Tensioner and Idler Bearings features include:
- Rigorous testing and quality control for all bearing components.
- Built to withstand High-Performance use and optimal operation.
- Triple-Lip seal design to maximize grease retention and prevent contamination.
- Precise tolerances for easy installation.
It’s never a good idea to compromise on the quality of Belt Tensioners and Idler Bearings. GMB is known for Global OEM Manufacturing technology, and our proprietary designs ensure your parts are built to last.
$12.99Engine Timing Belt Idler
$12.99
Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$39.99Wheel Bearing
$39.99Engine Water Pump
All mechanical GMB water pumps meet or exceed OEM standards for performance and durability.
- Whether the housing is made of cast iron, aluminum, or stamped steel, our tight manufacturing tolerances make installation simple and trouble-free.
- Cooling is maximized with our precision-formed impellers and tested to meet or exceed OEM flow rate specifications at various RPMs.
- Our proprietary shaft seal design withstands wear, preventing leaks and maximizing longevity.
- Our genuine GMB steel bearings are made from top-quality materials.
Water pump failures can cause catastrophic damage to an engine; we make sure every GMB Water Pump will meet or exceed OEM specifications. And because we manufacture every water pump to tight tolerances, our dimensions are accurate, and installation is easy (easy installation is essential, as it prevents many of the issues that lead to leaks and premature failure).
When it’s time to replace the water pump in your vehicle, it makes sense to go with a reliable, top-quality replacement from GMB.
$33.99Engine Water Pump
$33.99
Wheel Bearing Collar
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$20.00Wheel Bearing Collar
$20.00
Fuel Pump and Strainer Set
OE Replacement Electric Fuel Pump Motors
GMB Fuel Pumps use only durable, OE replacement electric motors. These motors are developed to match the manufacturer’s specifications in terms of voltage, amperage, resistance, pressure, and volume to guarantee long lasting performance, consistent fuel pressure, and steady fuel delivery. GMB Fuel Pumps also use 99.90% pure copper on the internal wiring for greater electrical conductivity and optimal performance.
High-Grade Aluminum Cased Motors
GMB Fuel Pump motors are encased in a plastic fixture, and then that fixture is enclosed in a high-grade protective aluminum heat dissipation sleeve made of 5052 grade aluminum alloy.
150 Micron Pre-Pump Fuel Filters (Strainer)
GMB Pre-Pump Fuel Filters (also called a strainer) have a 150 micron rating and are made from the best non-paper filtering material available. All GMB Fuel Pump Assemblies include a filter (strainer). Fuel Strainers are also included with fuel pump kits, where noted.
$40.00Fuel Pump and Strainer Set
$40.00
Wheel Hub Repair Kit
High Grade Steel Bearings
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Roll Formed High-Grade Steel Hub
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
Specially Formulated Bearing Grease
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Triple & Quadruple Lip Sealing
GMB Hub Bearing Assemblies use a triple and quadruple lip sealing technology. This technique uses high temperature resistant rubber to achieve maximum bearing protection against dust, water and road debris.
$55.99Wheel Hub Repair Kit
$55.99
Wheel Bearing and Hub Assembly
High Grade Steel Bearings
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Roll Formed High-Grade Steel Hub
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
Specially Formulated Bearing Grease
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Triple & Quadruple Lip Sealing
GMB Hub Bearing Assemblies use a triple and quadruple lip sealing technology. This technique uses high temperature resistant rubber to achieve maximum bearing protection against dust, water and road debris.
$84.99Wheel Bearing and Hub Assembly
High Grade Steel Bearings
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Roll Formed High-Grade Steel Hub
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
Specially Formulated Bearing Grease
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Triple & Quadruple Lip Sealing
GMB Hub Bearing Assemblies use a triple and quadruple lip sealing technology. This technique uses high temperature resistant rubber to achieve maximum bearing protection against dust, water and road debris.
$61.99
Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
$25.99Wheel Bearing
$25.99
HP Chromebook CB 10014 Desktop
- Unrestrained and portable active stereo speaker
- Free from the confines of wires and chords
- 20 hours of portable capabilities
- Double-ended Coil Cord with 3.5mm Stereo Plugs Included
- 3/4″ Dome Tweeters: 2X and 4″ Woofer: 1X
$720.25HP Chromebook CB 10014 Desktop
$720.25
B&O Play Mini Bluetooth Speaker
- Unrestrained and portable active stereo speaker
- Free from the confines of wires and chords
- 20 hours of portable capabilities
- Double-ended Coil Cord with 3.5mm Stereo Plugs Included
- 3/4″ Dome Tweeters: 2X and 4″ Woofer: 1X
$174.45B&O Play Mini Bluetooth Speaker
$174.45Xbox One Wireless Controller Black Color
- Unrestrained and portable active stereo speaker
- Free from the confines of wires and chords
- 20 hours of portable capabilities
- Double-ended Coil Cord with 3.5mm Stereo Plugs Included
- 3/4″ Dome Tweeters: 2X and 4″ Woofer: 1X
$55.30
