No products in the cart.
BANDO
Neutral Safety Switch
For over 100 years, professional technicians have trusted Standard to replace the failed OE part. Standard manufacturers the highest-quality, best-performing parts for all import and domestic vehicles; gas, diesel, electric and hybrid. Precision manufacturing, multiple layers of testing, and a detailed validation process ensures Standard parts don’t just fit, they perform and they last.
Robust design and high grade materials meet the stringent demands of today’s service professional
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Decades of industry leading research and development focused on meeting the technician’s needs
As a global manufacturer of original equipment ignition products, we maintain complete quality control throughout the manufacturing process from componentry to finished product
$49.99Neutral Safety Switch
$49.99
Wheel Bearing and Hub Assembly
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
$42.99
Engine Camshaft Position Sensor
To protect against failure, we manufacture camshaft sensors using premium components, including:
- Fluorocarbon rubber oil seal ensures secure fit
- Integrated waterproof connector ensures lasting performance
- Sealed construction withstands extreme under-hood conditions
- Advanced circuitry provides immunity from EMI (such as stray electro-magnetic fields, power spikes, and static electricity) that meets ISO standards
$39.99
Throttle Position Sensor
For over 100 years, professional technicians have trusted Standard to replace the failed OE part. Standard manufacturers the highest-quality, best-performing parts for all import and domestic vehicles; gas, diesel, electric and hybrid. Precision manufacturing, multiple layers of testing, and a detailed validation process ensures Standard parts don’t just fit, they perform and they last.
Our Throttle Position Sensors maintain specific installed outputs to match OE rather than adjustable consolidated designs
Circuits are printed on flexible polyimide film or ceramic-based substrates for excellent dimensional stability preventing electrical performance drift. Noble palladium/gold/platinum alloys provide low contact resistance for extended service life
Each TPS uses integral rotor bearings and return springs for easy installation
Each sensor undergoes rigorous end-of-line testing with thousands of data points to validate output voltages for optimum performance and trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
As a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
$53.10Throttle Position Sensor
$53.10
Serpentine Belt
Combines our OE technology and experience to offer an accessory drive belt that outperforms the competition. Extensive coverage for Domestic and Import applications. Flexible, oil and heat resistant backing extend belt life. Strong tensile cords carry high horsepower loads without stretching. Ground rubber ribs are compounded from high strength synthetic rubber for wear resistance and long life. Bando Rib Ace® exceeds OE manufacturing specifications. Proprietary “Run Quiet” technology for better grip, less slip resulting in a quieter operation. Precise metric sizing and machine cut ribs for a more exact OE fit. Proprietary EPDM compounding for longer life. Soft compound backing to reduce noise. Bidirectional cord to eliminate tracking.
$19.99Serpentine Belt
$19.99
Engine Water Pump
- 100% factory tested for leakage and dimensional precision
- Bearing noise and durability-tested
- Designed to match OE coolant flow rate and pressure
$40.99Engine Water Pump
$40.99
Ignition Control Module
The ignition control module is a solid-state switching device that controls the operation of the ignition coil or coils. It is a small, high-current circuit used to ground the negative side of the coil in order to build charge.
In order to fire a spark plug, the engine management system sends a signal to an ignition module which then sends a signal to the ignition coil. This signal tells the coil how long to charge for and when to fire the spark. This process regulates the vehicle’s base ignition timing.
Ignition Control Modules fail when they overheat. The most common symptom of failure is a no-start. A failing module may give other symptoms, such as engine stuttering and stalling, before it stops working.
Standard® Ignition Control Modules resist failure. Extensive testing and ensure that all Standard Motor Product Ignition Control Modules are manufactured to meet or exceed OE fit, form and function.
Our Ignition Control Modules use top-of-the-line technology to ensure perfect timing every time. They match the OE part and ensure better connections, greater dependability and longer life despite being subjected to the engine’s intense vibrations and the tough operating environment.
$62.00Ignition Control Module
$62.00
Engine Timing Belt Idler
When working with Serpentine and Timing Belts, Tensioners and Idler Bearings are vital to ensure proper engine performance. In some situations, a Tensioner or Idler Bearing is a critical component in protecting your engine from severe damage and catastrophic failure. GMB Tensioner and Idler Bearings features include:
- Rigorous testing and quality control for all bearing components.
- Built to withstand High-Performance use and optimal operation.
- Triple-Lip seal design to maximize grease retention and prevent contamination.
- Precise tolerances for easy installation.
It’s never a good idea to compromise on the quality of Belt Tensioners and Idler Bearings. GMB is known for Global OEM Manufacturing technology, and our proprietary designs ensure your parts are built to last.
$12.99Engine Timing Belt Idler
$12.99
Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$39.99Wheel Bearing
$39.99
