No products in the cart.
BANDO
Serpentine Belt
Combines our OE technology and experience to offer an accessory drive belt that outperforms the competition. Extensive coverage for Domestic and Import applications. Flexible, oil and heat resistant backing extend belt life. Strong tensile cords carry high horsepower loads without stretching. Ground rubber ribs are compounded from high strength synthetic rubber for wear resistance and long life. Bando Rib Ace® exceeds OE manufacturing specifications. Proprietary “Run Quiet” technology for better grip, less slip resulting in a quieter operation. Precise metric sizing and machine cut ribs for a more exact OE fit. Proprietary EPDM compounding for longer life. Soft compound backing to reduce noise. Bidirectional cord to eliminate tracking.
$19.99Serpentine Belt
$19.99
20V MAX Lithium-Ion 6.0Ah and 4.0Ah Battery and Charger Starter Kit
This 20V MAX starter kit includes a 6.0Ah battery, a 4.0Ah battery, 4 Amp charger, and a kit bag. Both batteries are compact in size and lightweight, providing ergonomic benefits for increased tool maneuverability and control for overhead applications. The charger is compatible with all DEWALT 12-Volt and 20-Volt MAX Lithium-Ion battery packs, this charger is easy to use, quiet and exceptionally stable with its 4-plastic ft.
$189.99
Heater Hose
Dayco Molded Heater Hose
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$19.99Heater Hose
$19.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$16.99Curved Radiator Hose
$16.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$24.99Curved Radiator Hose
$24.99
Poly Rib Belt
Designed to provide full coverage for today’s light duty vehicle market, especially vehicles with troublesome drives.
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Dayco Poly-V serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperature.
$29.99Poly Rib Belt
$29.99
Accessory Drive Belt
Where the rubber meets the road in testing, research, development and materials science. Dayco has been developing OE quality belts since the early 1970s. And, throughout the years, our scientists and researchers have worked meticulously to invent new belt technologies with unique chemistries and materials for a range of drive system designs and applications. We utilize the highest quality rubber, EPDM, polymer compounds, carbon fibers, aramid and more, so that our belts provide longer lasting performance, excellent temperature resistance, less slippage and reduced noise and vibration. And as our designs continue evolving, we bring to market more coverage and applications across different market segments which meet ever-changing performance and environmental requirements.
$16.99Accessory Drive Belt
$16.99
Engine Timing Belt Tensioner Pulley
Engineered for all automotive applications that require a timing belt.
Designed to absorb changes in loss of timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt. Maintaining belt tension at a constant level reduces noise, prevents belt flapping, and ensures proper timing effectiveness throughout the entire service life of the belt. This Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.
$33.99
1/2 in. VSR™ Pistol Grip Hammer Drill Kit
- 10 amp motor delivers increased drilling performance
- Patented DEWALT®-built motor design generates 50% more power with increased overload protection for added durability
- Dual mode: hammerdrill / drill for versatility in masonry, wood, or steel drilling applications
$219.99
20V MAX* 1 in. Brushless Cordless SDS PLUS D-Handle Rotary Hammer (Tool Only)
- 2.6 Joules of impact energy for fast drilling in concrete
- Lightweight design makes this tool ideal for forming, rod hanging, structural connections, beam & column anchorage, steel stanchion mounting, and clip & bracket mounting
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime
$199.99
68 lb. 1-1/8 in. Hex Pavement Breaker
- Shocks – Active Vibration Control reduces vibration felt by the user at the handles. A Perform and Protect feature
- 52 joules of impact energy provides maximum demolition performance
- 15 amp motor provides maximum power and overload protection
Angle Grinder 4-1/2″ (115mm) – 5″ (125mm) 1500W
- Dust extraction system protects the tool’s motor.
- Electronic safety clutch that stops the disc in less than 0.1 seconds when a jam is detected to prevent accidents.
- Thermal cut-off to prevent overload.
$149.99
12 lb. (5.6kg) SDS MAX Chipping Hammer
- 7.1J”s and 3150 BPM For fast and efficient chipping and breaking, even in the hardest concrete
- Low Vibe Side Handle For comfort during extended working intervals
- At 13lbs is ideally suited for all day work on concrete and masonry walls, floor and wall channeling, and removing plaster and tile from floors, walls and ceilings
$399.99
1 in. SDS Pistol Grip Hammer
- 2.6 joules of impact energy for fast drilling and chipping speed
- 8.0 amp high performance motor
- Rotating brush ring delivers full speed/torque in forward and reverse
$199.991 in. SDS Pistol Grip Hammer
$199.99
Carquest Premium Alternator: Remanufactured
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
$204.99
Radiator: With Transmission Oil Cooler
Warranty Details (LIMITED LIFETIME REPLACEMENT)Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicles engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
$200.00
Hose Water
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$11.99Hose Water
$11.99
Radiator Lower Hose
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40˚F (-40˚C) to +257˚F (+125˚C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
$19.99Radiator Lower Hose
$19.99
Small I.D. Heater Hose
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$22.99Small I.D. Heater Hose
$22.99
Idler/Tensioner Pulley
Dayco Heavy-Duty Idler/Tensioner Pulley
Engineered for the demanding drive systems of today’s heavy-duty commercial trucks, class 4-8.
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco heavy-duty idler/tensioner pulleys are machined from high strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
$31.99Idler/Tensioner Pulley
$31.99
Idler/Tensioner Pulley
Dayco Heavy-Duty Idler/Tensioner Pulley
Engineered for the demanding drive systems of today’s heavy-duty commercial trucks, class 4-8.
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco heavy-duty idler/tensioner pulleys are machined from high strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
$49.99Idler/Tensioner Pulley
$49.99
Automatic Belt Tensioner
Specially engineered to address installation issues for over half a million Detroit Diesel 13 and 15 series engine applications.
The Dayco heavy-duty 2-piece tensioner was designed with an outer and inner tensioner that cuts the installation time in half compared to competitive products. Machined from high strength steel or powdered metal to provide excellent wear resistance under harsh environments, this unique 2-piece design also features Dayco’s patented flat spring technology and dual pressed-in pulley bearings to provide long bearing life and protection against the shock loads.
$96.99Automatic Belt Tensioner
$96.99
Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J168
$15.99Curved Radiator Hose
$15.99
