No products in the cart.
BANDO
Wheel Bearing and Hub Assembly
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
$42.99
Serpentine Belt
Combines our OE technology and experience to offer an accessory drive belt that outperforms the competition. Extensive coverage for Domestic and Import applications. Flexible, oil and heat resistant backing extend belt life. Strong tensile cords carry high horsepower loads without stretching. Ground rubber ribs are compounded from high strength synthetic rubber for wear resistance and long life. Bando Rib Ace® exceeds OE manufacturing specifications. Proprietary “Run Quiet” technology for better grip, less slip resulting in a quieter operation. Precise metric sizing and machine cut ribs for a more exact OE fit. Proprietary EPDM compounding for longer life. Soft compound backing to reduce noise. Bidirectional cord to eliminate tracking.
$19.99Serpentine Belt
$19.99
20V MAX Lithium-Ion 6.0Ah and 4.0Ah Battery and Charger Starter Kit
This 20V MAX starter kit includes a 6.0Ah battery, a 4.0Ah battery, 4 Amp charger, and a kit bag. Both batteries are compact in size and lightweight, providing ergonomic benefits for increased tool maneuverability and control for overhead applications. The charger is compatible with all DEWALT 12-Volt and 20-Volt MAX Lithium-Ion battery packs, this charger is easy to use, quiet and exceptionally stable with its 4-plastic ft.
$189.99
Engine Water Pump
- 100% factory tested for leakage and dimensional precision
- Bearing noise and durability-tested
- Designed to match OE coolant flow rate and pressure
$40.99Engine Water Pump
$40.99
1/2 in. VSR™ Pistol Grip Hammer Drill Kit
- 10 amp motor delivers increased drilling performance
- Patented DEWALT®-built motor design generates 50% more power with increased overload protection for added durability
- Dual mode: hammerdrill / drill for versatility in masonry, wood, or steel drilling applications
$219.99
20V MAX* 1 in. Brushless Cordless SDS PLUS D-Handle Rotary Hammer (Tool Only)
- 2.6 Joules of impact energy for fast drilling in concrete
- Lightweight design makes this tool ideal for forming, rod hanging, structural connections, beam & column anchorage, steel stanchion mounting, and clip & bracket mounting
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime
$199.99
68 lb. 1-1/8 in. Hex Pavement Breaker
- Shocks – Active Vibration Control reduces vibration felt by the user at the handles. A Perform and Protect feature
- 52 joules of impact energy provides maximum demolition performance
- 15 amp motor provides maximum power and overload protection
Angle Grinder 4-1/2″ (115mm) – 5″ (125mm) 1500W
- Dust extraction system protects the tool’s motor.
- Electronic safety clutch that stops the disc in less than 0.1 seconds when a jam is detected to prevent accidents.
- Thermal cut-off to prevent overload.
$149.99
12 lb. (5.6kg) SDS MAX Chipping Hammer
- 7.1J”s and 3150 BPM For fast and efficient chipping and breaking, even in the hardest concrete
- Low Vibe Side Handle For comfort during extended working intervals
- At 13lbs is ideally suited for all day work on concrete and masonry walls, floor and wall channeling, and removing plaster and tile from floors, walls and ceilings
$399.99
1 in. SDS Pistol Grip Hammer
- 2.6 joules of impact energy for fast drilling and chipping speed
- 8.0 amp high performance motor
- Rotating brush ring delivers full speed/torque in forward and reverse
$199.991 in. SDS Pistol Grip Hammer
$199.99
Engine Timing Belt Idler
When working with Serpentine and Timing Belts, Tensioners and Idler Bearings are vital to ensure proper engine performance. In some situations, a Tensioner or Idler Bearing is a critical component in protecting your engine from severe damage and catastrophic failure. GMB Tensioner and Idler Bearings features include:
- Rigorous testing and quality control for all bearing components.
- Built to withstand High-Performance use and optimal operation.
- Triple-Lip seal design to maximize grease retention and prevent contamination.
- Precise tolerances for easy installation.
It’s never a good idea to compromise on the quality of Belt Tensioners and Idler Bearings. GMB is known for Global OEM Manufacturing technology, and our proprietary designs ensure your parts are built to last.
$12.99Engine Timing Belt Idler
$12.99
Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$39.99Wheel Bearing
$39.99
1/2″ (13mm) 710W VVR Hammer Drill/Driver
- Mode selector allows you to easily and quickly change speed according to the application to be carried out.
- Ergonomic design for better support.
- Air ventilation slots, offer maximum air flow preventing dust and debris from entering the motor.
$169.99
