CARICO
Molded Heater Hose
Dayco Small I.D. Molded Heater Hose
Designed to replace OEM coolant hose and provide long, reliable service in applications where molded hoses in small diameters are required.
Made with the same bends and routing as the OEM assembly, this molded hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation. In addition to meeting SAE J20R3, Class D-1 requirements, the Dayco small I.D. molded heater hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
$7.99Molded Heater Hose
$7.99
Lower Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$14.99Lower Radiator Hose
$14.99
Curved Radiator Hose
Capable of withstanding extreme temperatures and high-pressure environments, all Dayco coolant hoses are designed to meet OE specifications as well as all relevant SAE standards.
$4.99Curved Radiator Hose
$4.99
Heater Hose
Dayco Molded Heater Hose
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$19.99Heater Hose
$19.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$16.99Curved Radiator Hose
$16.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$24.99Curved Radiator Hose
$24.99
Poly Rib Belt
Designed to provide full coverage for today’s light duty vehicle market, especially vehicles with troublesome drives.
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Dayco Poly-V serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperature.
$29.99Poly Rib Belt
$29.99
Accessory Drive Belt
Where the rubber meets the road in testing, research, development and materials science. Dayco has been developing OE quality belts since the early 1970s. And, throughout the years, our scientists and researchers have worked meticulously to invent new belt technologies with unique chemistries and materials for a range of drive system designs and applications. We utilize the highest quality rubber, EPDM, polymer compounds, carbon fibers, aramid and more, so that our belts provide longer lasting performance, excellent temperature resistance, less slippage and reduced noise and vibration. And as our designs continue evolving, we bring to market more coverage and applications across different market segments which meet ever-changing performance and environmental requirements.
$16.99Accessory Drive Belt
$16.99
Engine Timing Belt Tensioner Pulley
Engineered for all automotive applications that require a timing belt.
Designed to absorb changes in loss of timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt. Maintaining belt tension at a constant level reduces noise, prevents belt flapping, and ensures proper timing effectiveness throughout the entire service life of the belt. This Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.
$33.99
Hose Water
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$11.99Hose Water
$11.99
Radiator Lower Hose
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40˚F (-40˚C) to +257˚F (+125˚C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
$19.99Radiator Lower Hose
$19.99
Small I.D. Heater Hose
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$22.99Small I.D. Heater Hose
$22.99
Idler/Tensioner Pulley
Dayco Heavy-Duty Idler/Tensioner Pulley
Engineered for the demanding drive systems of today’s heavy-duty commercial trucks, class 4-8.
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco heavy-duty idler/tensioner pulleys are machined from high strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
$31.99Idler/Tensioner Pulley
$31.99
Idler/Tensioner Pulley
Dayco Heavy-Duty Idler/Tensioner Pulley
Engineered for the demanding drive systems of today’s heavy-duty commercial trucks, class 4-8.
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco heavy-duty idler/tensioner pulleys are machined from high strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
$49.99Idler/Tensioner Pulley
$49.99
Automatic Belt Tensioner
Specially engineered to address installation issues for over half a million Detroit Diesel 13 and 15 series engine applications.
The Dayco heavy-duty 2-piece tensioner was designed with an outer and inner tensioner that cuts the installation time in half compared to competitive products. Machined from high strength steel or powdered metal to provide excellent wear resistance under harsh environments, this unique 2-piece design also features Dayco’s patented flat spring technology and dual pressed-in pulley bearings to provide long bearing life and protection against the shock loads.
$96.99Automatic Belt Tensioner
$96.99
Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J168
$15.99Curved Radiator Hose
$15.99
Small I.D. Heater Hose
Designed to replace OEM coolant hose and provide long, reliable service in applications where molded hoses in small diameters are required.
Made with the same bends and routing as the OEM assembly, this molded hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation. In addition to meeting SAE J20R3, Class D-1 requirements, the Dayco small I.D. molded heater hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
$9.99Small I.D. Heater Hose
$9.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$17.99Radiator Hose
$17.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$17.99Radiator Hose
$17.99
Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J1684.
$15.99Curved Radiator Hose
$15.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$38.99Radiator Hose
$38.99
Belt Drive
Where the rubber meets the road in testing, research, development and materials science. Dayco has been developing OE quality belts since the early 1970s. And, throughout the years, our scientists and researchers have worked meticulously to invent new belt technologies with unique chemistries and materials for a range of drive system designs and applications. We utilize the highest quality rubber, EPDM, polymer compounds, carbon fibers, aramid and more, so that our belts provide longer lasting performance, excellent temperature resistance, less slippage and reduced noise and vibration. And as our designs continue evolving, we bring to market more coverage and applications across different market segments which meet ever-changing performance and environmental requirements.
$44.99Belt Drive
$44.99
Fuel Pump Module Assembly
Distinctly Delphi Fuel Pumps
- Anodized aluminum can reduce flow loss by up to 100% in severe contamination
- New carbon commutator extends fuel pump life by up to 300% over commonly used copper commutators by reducing oxidation and premature wear*
- Over-molded armature protects pump windings in corrosive environments
- Button style contacts feature additional wear material that can last for over 1 million cycles
- High capacity synthetic mesh inlet filter is able to filter out all items larger than 30 microns
- Distinctly Delphi with an electric blue fuel pump top, module top cover and strainer material
$124.99Fuel Pump Module Assembly
$124.99Wheel Hub
CARICO chassis parts are designed and manufactured to meet OEM standards and undergo strict quality tests to ensure a perfect fit.
- All parts are manufactured with ISO 9001 certification.
- Company legally registered in Taiwan, official company documents available on the Internet, you can absolutely trust us.
- Our business includes national and international sales, definitely quality tested by the aftermarket.
- Energetic and professional group. Our team has an experience of more than 35 years in the professional area. No matter what kind of problem you have encountered, it is our pleasure to help you solve it.
$29.99Wheel Hub
$29.99
Interior Door Handle
Hushan is the largest aftermarket door handle manufacturer in the world. We are the industry leader in new parts development with over 10,000 parts available in stock, and develop over 1000 new items every year.
In recent years, we focused on developing parking cameras and sensors. In Nov.29, 2019, we became the first and only CAPA Certified Participant in parking cameras/sensors. In 2020, we will have 50 cameras SKUs certified by CAPA. We partner with Tier 1 suppliers such as Nidec Lens and ON Semi, we ensure the latest technology for superior quality. We have standardized camera hardware and structure for over 1,000 SKUs, and we have cameras structure patent(Patent# NP31343, USA Patent Pending) to protect our clients.
All camera products meet the FMVSS111 safety regulation by NHTSA. With over 300+SKUs available in stock, we aim to develop over 100 new cameras annually. Our products are 100% inspection in house to ensure top quality.
We are also working CAPA to develop parking sensors protocol. 100% of our parking sensors will be CAPA Certified once it releases CAPA protocol. Our parking sensor detection testing follows FMVSS571 safety regulation by NHTSA.
$9.99Interior Door Handle
$9.99
TIMING BELT
ATTRIBUTES SPECIFICATIONS Effective Length (mm) 1229 No. of Teeth 129 Construction Type Std Temp and Load Tooth Profile Round Tooth Timing Marks N Tooth Pitch (mm) 9.53 Top Width (mm) 22 $26.16TIMING BELT
$26.16
Package 2 iClever Bootscube Mini Chargers
- Unrestrained and portable active stereo speaker
- Free from the confines of wires and chords
- 20 hours of portable capabilities
- Double-ended Coil Cord with 3.5mm Stereo Plugs Included
- 3/4″ Dome Tweeters: 2X and 4″ Woofer: 1X
$57.92
Android Tablet 10” 16GB Marshmallow
- Unrestrained and portable active stereo speaker
- Free from the confines of wires and chords
- 20 hours of portable capabilities
- Double-ended Coil Cord with 3.5mm Stereo Plugs Included
- 3/4″ Dome Tweeters: 2X and 4″ Woofer: 1X
$96.95
Samsung Gear VR Virtual Reality Headset
- Unrestrained and portable active stereo speaker
- Free from the confines of wires and chords
- 20 hours of portable capabilities
- Double-ended Coil Cord with 3.5mm Stereo Plugs Included
- 3/4″ Dome Tweeters: 2X and 4″ Woofer: 1X
$64.90Samsung Gear VR Virtual Reality Headset
- Unrestrained and portable active stereo speaker
- Free from the confines of wires and chords
- 20 hours of portable capabilities
- Double-ended Coil Cord with 3.5mm Stereo Plugs Included
- 3/4″ Dome Tweeters: 2X and 4″ Woofer: 1X
$64.25$81.30Samsung Gear VR Virtual Reality Headset
$64.25$81.30
Samsung Gear VR Virtual Reality Headset
- Unrestrained and portable active stereo speaker
- Free from the confines of wires and chords
- 20 hours of portable capabilities
- Double-ended Coil Cord with 3.5mm Stereo Plugs Included
- 3/4″ Dome Tweeters: 2X and 4″ Woofer: 1X
$64.90
Samsung UHD TV 24inch
- Unrestrained and portable active stereo speaker
- Free from the confines of wires and chords
- 20 hours of portable capabilities
- Double-ended Coil Cord with 3.5mm Stereo Plugs Included
- 3/4″ Dome Tweeters: 2X and 4″ Woofer: 1X
$599.60Samsung UHD TV 24inch
$599.60
