No products in the cart.
KoolZone
Engine Coolant Thermostat Housing
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
$11.99
Airbag Clock Spring
This air bag clockspring matches the fit of an original that is missing or damaged and is designed to restore current to the air bag, horn, and steering wheel-mounted controls on specified vehicles.
- Direct replacement – reverse-engineered to match the original clockspring on specific vehicles
- Ideal solution – engineered to ensure proper restoration of air bag system performance
- Durable construction – designed, manufactured and tested to strict specifications for reliable service
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
$194.99Airbag Clock Spring
$194.99
Fully Synthetic Motor Oil 0W-20
AISIN greenTECH+ Motor Oil is formulated with VHVI base oils, high performance additive systems and leading edge viscosity index improver, which meet the requirement of current advanced top-tier engine oil grade of API SP and ILSAC GF-6A and GF-6B. It is optimized to provide complete engine oil performance, especially fuel efficiency, through friction reduction and enhanced durability.
greenTECH+
- For Gasoline (and Diesel) engine application equipped with T-GDI, GDI, DOHC, EFI and VVT features
- Prevention & Protection of LSPI (Low Speed Pre-Ignition) phenomena for T-GDI engines
- For Gasoline (and Diesel) engines equipped with T-GDI, GDI, DOHC, EFI and VVT features
- Prevention and protection of LSPJ (low speed pre-ignition) phenomenon for T-GDI engines
$9.99
Transmission Clutch Kit
AISIN Clutch Kits are produced using AISIN OE equipment technology, to the same exacting tolerances and quality standards. Each Kit contains precision components that are built to deliver improved drivetrain efficiency with faithful power transfer. With an AISIN Clutch Kit, drivers enjoy precise pedal control for a more confident and smoother driving experience.
- Kit Includes: AISIN Clutch Cover & Disc, Release Bearing, Pilot Bearing (if required), & Alignment Tool
- Maintains optimal drivetrain efficiency
- OE quality bearing(s) and vehicle specific alignment tool included for trouble-free installation
$130.99Transmission Clutch Kit
$130.99
Heater Hose
Dayco Molded Heater Hose
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$19.99Heater Hose
$19.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$16.99Curved Radiator Hose
$16.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$24.99Curved Radiator Hose
$24.99
Water Pump
AISIN takes pride in being the No. 1 water pump supplier to Japanese automobile manufactures. Utilizing the experience and knowledge gained throughout the years of cooperation directly with automotive manufacturers, AISIN is able to employ a technological advantage in manufacturing and supplying the best in quality and the most durable of products. With this momentum, AISIN is increasing the development, manufacturing and supply for European and American automobile manufacturers.
- AISIN Water Pumps are engineered to provide reliable and efficient cooling to the engine, by circulating coolant throughout the engine block, while also being durable enough to withstand the rigors of daily use and high mileage.
- AISIN Water Pumps are an essential component of the engine’s cooling system. They are responsible for circulating coolant throughout the engine block, which helps to keep the engine running at the proper temperature. AISIN manufactures high-quality OE water pumps that are designed to provide reliable and efficient cooling to the engine. They are engineered to withstand the rigors of daily use and high mileage, ensuring that the engine runs at the proper temperature even under heavy loads or high-performance driving conditions.
- In addition to providing reliable and efficient cooling, AISIN water pumps also help extend the life of the engine by preventing overheating and any possible damage caused by high temperatures. They are also designed to operate quietly and be low maintenance.
$42.95Water Pump
$42.95
Poly Rib Belt
Designed to provide full coverage for today’s light duty vehicle market, especially vehicles with troublesome drives.
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Dayco Poly-V serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperature.
$29.99Poly Rib Belt
$29.99
Accessory Drive Belt
Where the rubber meets the road in testing, research, development and materials science. Dayco has been developing OE quality belts since the early 1970s. And, throughout the years, our scientists and researchers have worked meticulously to invent new belt technologies with unique chemistries and materials for a range of drive system designs and applications. We utilize the highest quality rubber, EPDM, polymer compounds, carbon fibers, aramid and more, so that our belts provide longer lasting performance, excellent temperature resistance, less slippage and reduced noise and vibration. And as our designs continue evolving, we bring to market more coverage and applications across different market segments which meet ever-changing performance and environmental requirements.
$16.99Accessory Drive Belt
$16.99
Engine Timing Belt Tensioner Pulley
Engineered for all automotive applications that require a timing belt.
Designed to absorb changes in loss of timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt. Maintaining belt tension at a constant level reduces noise, prevents belt flapping, and ensures proper timing effectiveness throughout the entire service life of the belt. This Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.
$33.99
THE BEAST HVLP SPRAY GUN 1.3 + 1.4 KIT W/ DIGITAL REGULATOR
Simple. High Quality. Great atomization. HVLP spray gun designed for delivering quality finishes, at a budget.
$160.00
Clutch Slave Cylinder
AISIN Clutch Hydraulics are a mechanical system used in vehicles with manual transmissions. They use fluid pressure to engage and disengage the clutch, providing a smooth and consistent operation of the clutch pedal. These systems consist of a master cylinder, which is connected to the clutch pedal, and a slave cylinder, which is connected to the clutch itself. When the driver presses the clutch pedal, the master cylinder pushes fluid through a hose to the slave cylinder, which then pushes the clutch in or out. This allows for smooth and consistent engagement and disengagement off the clutch, providing the driver with a more responsive and comfortable driving experience.
AISIN’s original equipment technology and know-how is applied to design and engineer hydraulics. Each part is manufactured vehicle specific, ensuring product quality and reliability
- Precision honing of hydraulic cylinders monitored under OE quality control standards
- Anodizing and “Kanigen” plating of cylinder bodies strengthens surface, ensuring smooth operation of the piston, and resists corrosion
- Quick response design reacts to driver’s clutch and brake
- Heat resistant and extended life Ethylene Propylene Rubber Seals prevent leakage
$34.99Clutch Slave Cylinder
$34.99Clutch Master Cylinder
AISIN Clutch Hydraulics are a mechanical system used in vehicles with manual transmissions. They use fluid pressure to engage and disengage the clutch, providing a smooth and consistent operation of the clutch pedal. These systems consist of a master cylinder, which is connected to the clutch pedal, and a slave cylinder, which is connected to the clutch itself. When the driver presses the clutch pedal, the master cylinder pushes fluid through a hose to the slave cylinder, which then pushes the clutch in or out. This allows for smooth and consistent engagement and disengagement off the clutch, providing the driver with a more responsive and comfortable driving experience.
AISIN’s original equipment technology and know-how is applied to design and engineer hydraulics. Each part is manufactured vehicle specific, ensuring product quality and reliability
- Precision honing of hydraulic cylinders monitored under OE quality control standards
- Anodizing and “Kanigen” plating of cylinder bodies strengthens surface, ensuring smooth operation of the piston, and resists corrosion
- Quick response design reacts to driver’s clutch and brake
- Heat resistant and extended life Ethylene Propylene Rubber Seals prevent leakage
$59.99Clutch Master Cylinder
$59.99
Hose Water
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$11.99Hose Water
$11.99
Radiator Lower Hose
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40˚F (-40˚C) to +257˚F (+125˚C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
$19.99Radiator Lower Hose
$19.99
Small I.D. Heater Hose
Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely as an OEM replacement.
The Dayco molded heater hose is constructed with knitted reinforcement and synthetic EPDM compounds for high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. With a “quick connect” end (where applicable) assembled onto the hose for fast, convenient installation, you can avoid the hassle of buying a separate connector and clamp.
$22.99Small I.D. Heater Hose
$22.99
Idler/Tensioner Pulley
Dayco Heavy-Duty Idler/Tensioner Pulley
Engineered for the demanding drive systems of today’s heavy-duty commercial trucks, class 4-8.
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco heavy-duty idler/tensioner pulleys are machined from high strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
$31.99Idler/Tensioner Pulley
$31.99
Idler/Tensioner Pulley
Dayco Heavy-Duty Idler/Tensioner Pulley
Engineered for the demanding drive systems of today’s heavy-duty commercial trucks, class 4-8.
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco heavy-duty idler/tensioner pulleys are machined from high strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
$49.99Idler/Tensioner Pulley
$49.99
Automatic Belt Tensioner
Specially engineered to address installation issues for over half a million Detroit Diesel 13 and 15 series engine applications.
The Dayco heavy-duty 2-piece tensioner was designed with an outer and inner tensioner that cuts the installation time in half compared to competitive products. Machined from high strength steel or powdered metal to provide excellent wear resistance under harsh environments, this unique 2-piece design also features Dayco’s patented flat spring technology and dual pressed-in pulley bearings to provide long bearing life and protection against the shock loads.
$96.99Automatic Belt Tensioner
$96.99
Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J168
$15.99Curved Radiator Hose
$15.99
Small I.D. Heater Hose
Designed to replace OEM coolant hose and provide long, reliable service in applications where molded hoses in small diameters are required.
Made with the same bends and routing as the OEM assembly, this molded hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation. In addition to meeting SAE J20R3, Class D-1 requirements, the Dayco small I.D. molded heater hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
$9.99Small I.D. Heater Hose
$9.99
Engine Coolant Pipe
Original equipment coolant pipes often fail due to frail plastic construction. This Dorman OE FIX replacement is made of aluminum for greater durability to prevent future failure.
- Direct replacement – this engine coolant pipe installs exactly as the original part for a perfect fit
- Improved design – this coolant pipe is made of aluminum instead of plastic for greater durability and leak resistance
- Durable materials – designed for greater heat resistance in harsh underhood environment
- Quality assured – part has undergone fitment and pressure testing to ensure quality and performance
$29.99Engine Coolant Pipe
$29.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$17.99Radiator Hose
$17.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$17.99Radiator Hose
$17.99
Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J1684.
$15.99Curved Radiator Hose
$15.99Window Regulator and Lift Motor Assembly
This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
- Reliable design – engineered in North America and backed by long history of automotive aftermarket experience
$129.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$38.99Radiator Hose
$38.99
Belt Drive
Where the rubber meets the road in testing, research, development and materials science. Dayco has been developing OE quality belts since the early 1970s. And, throughout the years, our scientists and researchers have worked meticulously to invent new belt technologies with unique chemistries and materials for a range of drive system designs and applications. We utilize the highest quality rubber, EPDM, polymer compounds, carbon fibers, aramid and more, so that our belts provide longer lasting performance, excellent temperature resistance, less slippage and reduced noise and vibration. And as our designs continue evolving, we bring to market more coverage and applications across different market segments which meet ever-changing performance and environmental requirements.
$44.99Belt Drive
$44.99
Loaded Brake Backing Plate
Servicing corroded parking brake shoe and backing plate assemblies is a time-consuming repair. This loaded brake backing plate is preassembled with the components required to make a complete repair, saving time and hassle.
- Ideal solution – this loaded brake backing plate comes preassembled with the components required to make a complete parking brake repair
- Time saver – eliminates frustrating, unpredictable work required to replace individual corroded components
- Direct replacement – engineered and manufactured to match the fit and function of the original parts
- Application specific – designed for specified vehicles and wheel positions
$150.00Loaded Brake Backing Plate
$150.00
Engine Coolant Thermostat Housing Assembly
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
$67.99Parking Brake Cable
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
- Quality design – inner cables are sheathed and lubricated to provide improved durability
- Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
- Tough materials – zinc-plated fittings prevent corrosion
$41.99Parking Brake Cable
$41.99Parking Brake Cable
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
- Quality design – inner cables are sheathed and lubricated to provide improved durability
- Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
- Tough materials – zinc-plated fittings prevent corrosion
$41.99Parking Brake Cable
$41.99
Engine Water Pump
AISIN takes pride in being the No. 1 water pump supplier to Japanese automobile manufactures. Utilizing the experience and knowledge gained throughout the years of cooperation directly with automotive manufacturers, AISIN is able to employ a technological advantage in manufacturing and supplying the best in quality and the most durable of products. With this momentum, AISIN is increasing the development, manufacturing and supply for European and American automobile manufacturers.
- AISIN Water Pumps are engineered to provide reliable and efficient cooling to the engine, by circulating coolant throughout the engine block, while also being durable enough to withstand the rigors of daily use and high mileage.
- AISIN Water Pumps are an essential component of the engine’s cooling system. They are responsible for circulating coolant throughout the engine block, which helps to keep the engine running at the proper temperature. AISIN manufactures high-quality OE water pumps that are designed to provide reliable and efficient cooling to the engine. They are engineered to withstand the rigors of daily use and high mileage, ensuring that the engine runs at the proper temperature even under heavy loads or high-performance driving conditions.
- In addition to providing reliable and efficient cooling, AISIN water pumps also help extend the life of the engine by preventing overheating and any possible damage caused by high temperatures. They are also designed to operate quietly and be low maintenance.
$39.99Engine Water Pump
$39.99
Upgraded Aluminum Engine Oil Filter Housing with Oil Cooler and Filter
The oil filter adapter on millions of Chrysler, Dodge, Jeep and Ram V6-powered vehicles often leaks oil CHAwhen its plastic housing warps from harsh underhood conditions. As the plastic eventually degrades from heat and chemical exposure, it can even crack from simply tightening the oil filter cap during oil changes. When it fails, replacing it with an OEM housing could mean the same issues again in the future. This patented Dorman OE FIX filter housing is made entirely of aluminum for a more durable replacement of the failure-prone OEM housing to help prevent future leaks. The housing comes complete with mounting and intake manifold gaskets for an effective repair. The kit also includes the oil cooler, oil filter element, and oil filter cap to update the vehicle to the latest design.
- Patented design – features high-pressure, die-cast aluminum housing construction to more reliably replace the failure-prone plastic housing on specific 2011 and later Chrysler, Dodge, Jeep and Ram vehicles with Pentastar engines
- Smarter solution – includes required gaskets, oil cooler, oil filter element and cap, bringing early fitments to latest generation filter specification; see included instructions on filter cap
- Trustworthy quality – engineered in the United States and made with durable materials to precise specifications, including premium seals to further help resist future leaks
- Repair it once – don’t replace a cracked oil filter adapter with one that can fail the same way again; fix it the right way with this improved design
$282.99
