No products in the cart.
MAVAL
Wheel Bearing and Hub Assembly
High Grade Steel Bearings
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Roll Formed High-Grade Steel Hub
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
Specially Formulated Bearing Grease
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Triple & Quadruple Lip Sealing
GMB Hub Bearing Assemblies use a triple and quadruple lip sealing technology. This technique uses high temperature resistant rubber to achieve maximum bearing protection against dust, water and road debris.
$61.99
Transmission Clutch Kit
AISIN Clutch Kits are produced using AISIN OE equipment technology, to the same exacting tolerances and quality standards. Each Kit contains precision components that are built to deliver improved drivetrain efficiency with faithful power transfer. With an AISIN Clutch Kit, drivers enjoy precise pedal control for a more confident and smoother driving experience.
- Kit Includes: AISIN Clutch Cover & Disc, Release Bearing, Pilot Bearing (if required), & Alignment Tool
- Maintains optimal drivetrain efficiency
- OE quality bearing(s) and vehicle specific alignment tool included for trouble-free installation
$130.99Transmission Clutch Kit
$130.99
Water Pump
AISIN takes pride in being the No. 1 water pump supplier to Japanese automobile manufactures. Utilizing the experience and knowledge gained throughout the years of cooperation directly with automotive manufacturers, AISIN is able to employ a technological advantage in manufacturing and supplying the best in quality and the most durable of products. With this momentum, AISIN is increasing the development, manufacturing and supply for European and American automobile manufacturers.
- AISIN Water Pumps are engineered to provide reliable and efficient cooling to the engine, by circulating coolant throughout the engine block, while also being durable enough to withstand the rigors of daily use and high mileage.
- AISIN Water Pumps are an essential component of the engine’s cooling system. They are responsible for circulating coolant throughout the engine block, which helps to keep the engine running at the proper temperature. AISIN manufactures high-quality OE water pumps that are designed to provide reliable and efficient cooling to the engine. They are engineered to withstand the rigors of daily use and high mileage, ensuring that the engine runs at the proper temperature even under heavy loads or high-performance driving conditions.
- In addition to providing reliable and efficient cooling, AISIN water pumps also help extend the life of the engine by preventing overheating and any possible damage caused by high temperatures. They are also designed to operate quietly and be low maintenance.
$42.95Water Pump
$42.95
Clutch Slave Cylinder
AISIN Clutch Hydraulics are a mechanical system used in vehicles with manual transmissions. They use fluid pressure to engage and disengage the clutch, providing a smooth and consistent operation of the clutch pedal. These systems consist of a master cylinder, which is connected to the clutch pedal, and a slave cylinder, which is connected to the clutch itself. When the driver presses the clutch pedal, the master cylinder pushes fluid through a hose to the slave cylinder, which then pushes the clutch in or out. This allows for smooth and consistent engagement and disengagement off the clutch, providing the driver with a more responsive and comfortable driving experience.
AISIN’s original equipment technology and know-how is applied to design and engineer hydraulics. Each part is manufactured vehicle specific, ensuring product quality and reliability
- Precision honing of hydraulic cylinders monitored under OE quality control standards
- Anodizing and “Kanigen” plating of cylinder bodies strengthens surface, ensuring smooth operation of the piston, and resists corrosion
- Quick response design reacts to driver’s clutch and brake
- Heat resistant and extended life Ethylene Propylene Rubber Seals prevent leakage
$34.99Clutch Slave Cylinder
$34.99Clutch Master Cylinder
AISIN Clutch Hydraulics are a mechanical system used in vehicles with manual transmissions. They use fluid pressure to engage and disengage the clutch, providing a smooth and consistent operation of the clutch pedal. These systems consist of a master cylinder, which is connected to the clutch pedal, and a slave cylinder, which is connected to the clutch itself. When the driver presses the clutch pedal, the master cylinder pushes fluid through a hose to the slave cylinder, which then pushes the clutch in or out. This allows for smooth and consistent engagement and disengagement off the clutch, providing the driver with a more responsive and comfortable driving experience.
AISIN’s original equipment technology and know-how is applied to design and engineer hydraulics. Each part is manufactured vehicle specific, ensuring product quality and reliability
- Precision honing of hydraulic cylinders monitored under OE quality control standards
- Anodizing and “Kanigen” plating of cylinder bodies strengthens surface, ensuring smooth operation of the piston, and resists corrosion
- Quick response design reacts to driver’s clutch and brake
- Heat resistant and extended life Ethylene Propylene Rubber Seals prevent leakage
$59.99Clutch Master Cylinder
$59.99Engine Water Pump
All mechanical GMB water pumps meet or exceed OEM standards for performance and durability.
- Whether the housing is made of cast iron, aluminum, or stamped steel, our tight manufacturing tolerances make installation simple and trouble-free.
- Cooling is maximized with our precision-formed impellers and tested to meet or exceed OEM flow rate specifications at various RPMs.
- Our proprietary shaft seal design withstands wear, preventing leaks and maximizing longevity.
- Our genuine GMB steel bearings are made from top-quality materials.
Water pump failures can cause catastrophic damage to an engine; we make sure every GMB Water Pump will meet or exceed OEM specifications. And because we manufacture every water pump to tight tolerances, our dimensions are accurate, and installation is easy (easy installation is essential, as it prevents many of the issues that lead to leaks and premature failure).
When it’s time to replace the water pump in your vehicle, it makes sense to go with a reliable, top-quality replacement from GMB.
$33.99Engine Water Pump
$33.99
Wheel Bearing and Hub Assembly
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
$42.99
Fully Synthetic Motor Oil 0W-20
AISIN greenTECH+ Motor Oil is formulated with VHVI base oils, high performance additive systems and leading edge viscosity index improver, which meet the requirement of current advanced top-tier engine oil grade of API SP and ILSAC GF-6A and GF-6B. It is optimized to provide complete engine oil performance, especially fuel efficiency, through friction reduction and enhanced durability.
greenTECH+
- For Gasoline (and Diesel) engine application equipped with T-GDI, GDI, DOHC, EFI and VVT features
- Prevention & Protection of LSPI (Low Speed Pre-Ignition) phenomena for T-GDI engines
- For Gasoline (and Diesel) engines equipped with T-GDI, GDI, DOHC, EFI and VVT features
- Prevention and protection of LSPJ (low speed pre-ignition) phenomenon for T-GDI engines
$9.99
Engine Water Pump
- 100% factory tested for leakage and dimensional precision
- Bearing noise and durability-tested
- Designed to match OE coolant flow rate and pressure
$40.99Engine Water Pump
$40.99
Engine Timing Belt Idler
When working with Serpentine and Timing Belts, Tensioners and Idler Bearings are vital to ensure proper engine performance. In some situations, a Tensioner or Idler Bearing is a critical component in protecting your engine from severe damage and catastrophic failure. GMB Tensioner and Idler Bearings features include:
- Rigorous testing and quality control for all bearing components.
- Built to withstand High-Performance use and optimal operation.
- Triple-Lip seal design to maximize grease retention and prevent contamination.
- Precise tolerances for easy installation.
It’s never a good idea to compromise on the quality of Belt Tensioners and Idler Bearings. GMB is known for Global OEM Manufacturing technology, and our proprietary designs ensure your parts are built to last.
$12.99Engine Timing Belt Idler
$12.99
Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$39.99Wheel Bearing
$39.99
Engine Water Pump
AISIN takes pride in being the No. 1 water pump supplier to Japanese automobile manufactures. Utilizing the experience and knowledge gained throughout the years of cooperation directly with automotive manufacturers, AISIN is able to employ a technological advantage in manufacturing and supplying the best in quality and the most durable of products. With this momentum, AISIN is increasing the development, manufacturing and supply for European and American automobile manufacturers.
- AISIN Water Pumps are engineered to provide reliable and efficient cooling to the engine, by circulating coolant throughout the engine block, while also being durable enough to withstand the rigors of daily use and high mileage.
- AISIN Water Pumps are an essential component of the engine’s cooling system. They are responsible for circulating coolant throughout the engine block, which helps to keep the engine running at the proper temperature. AISIN manufactures high-quality OE water pumps that are designed to provide reliable and efficient cooling to the engine. They are engineered to withstand the rigors of daily use and high mileage, ensuring that the engine runs at the proper temperature even under heavy loads or high-performance driving conditions.
- In addition to providing reliable and efficient cooling, AISIN water pumps also help extend the life of the engine by preventing overheating and any possible damage caused by high temperatures. They are also designed to operate quietly and be low maintenance.
$39.99Engine Water Pump
$39.99
Wheel Bearing Collar
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$20.00Wheel Bearing Collar
$20.00
Fuel Pump and Strainer Set
OE Replacement Electric Fuel Pump Motors
GMB Fuel Pumps use only durable, OE replacement electric motors. These motors are developed to match the manufacturer’s specifications in terms of voltage, amperage, resistance, pressure, and volume to guarantee long lasting performance, consistent fuel pressure, and steady fuel delivery. GMB Fuel Pumps also use 99.90% pure copper on the internal wiring for greater electrical conductivity and optimal performance.
High-Grade Aluminum Cased Motors
GMB Fuel Pump motors are encased in a plastic fixture, and then that fixture is enclosed in a high-grade protective aluminum heat dissipation sleeve made of 5052 grade aluminum alloy.
150 Micron Pre-Pump Fuel Filters (Strainer)
GMB Pre-Pump Fuel Filters (also called a strainer) have a 150 micron rating and are made from the best non-paper filtering material available. All GMB Fuel Pump Assemblies include a filter (strainer). Fuel Strainers are also included with fuel pump kits, where noted.
$40.00Fuel Pump and Strainer Set
$40.00
Wheel Hub Repair Kit
High Grade Steel Bearings
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Roll Formed High-Grade Steel Hub
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
Specially Formulated Bearing Grease
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Triple & Quadruple Lip Sealing
GMB Hub Bearing Assemblies use a triple and quadruple lip sealing technology. This technique uses high temperature resistant rubber to achieve maximum bearing protection against dust, water and road debris.
$55.99Wheel Hub Repair Kit
$55.99
Wheel Bearing and Hub Assembly
High Grade Steel Bearings
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Roll Formed High-Grade Steel Hub
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
Specially Formulated Bearing Grease
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
Triple & Quadruple Lip Sealing
GMB Hub Bearing Assemblies use a triple and quadruple lip sealing technology. This technique uses high temperature resistant rubber to achieve maximum bearing protection against dust, water and road debris.
$84.99
Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
$25.99Wheel Bearing
$25.99
