No products in the cart.
Tenacity
Neutral Safety Switch
For over 100 years, professional technicians have trusted Standard to replace the failed OE part. Standard manufacturers the highest-quality, best-performing parts for all import and domestic vehicles; gas, diesel, electric and hybrid. Precision manufacturing, multiple layers of testing, and a detailed validation process ensures Standard parts don’t just fit, they perform and they last.
Robust design and high grade materials meet the stringent demands of today’s service professional
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Decades of industry leading research and development focused on meeting the technician’s needs
As a global manufacturer of original equipment ignition products, we maintain complete quality control throughout the manufacturing process from componentry to finished product
$49.99Neutral Safety Switch
$49.99
Wheel Bearing and Hub Assembly
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
$42.99
Engine Camshaft Position Sensor
To protect against failure, we manufacture camshaft sensors using premium components, including:
- Fluorocarbon rubber oil seal ensures secure fit
- Integrated waterproof connector ensures lasting performance
- Sealed construction withstands extreme under-hood conditions
- Advanced circuitry provides immunity from EMI (such as stray electro-magnetic fields, power spikes, and static electricity) that meets ISO standards
$39.99
Throttle Position Sensor
For over 100 years, professional technicians have trusted Standard to replace the failed OE part. Standard manufacturers the highest-quality, best-performing parts for all import and domestic vehicles; gas, diesel, electric and hybrid. Precision manufacturing, multiple layers of testing, and a detailed validation process ensures Standard parts don’t just fit, they perform and they last.
Our Throttle Position Sensors maintain specific installed outputs to match OE rather than adjustable consolidated designs
Circuits are printed on flexible polyimide film or ceramic-based substrates for excellent dimensional stability preventing electrical performance drift. Noble palladium/gold/platinum alloys provide low contact resistance for extended service life
Each TPS uses integral rotor bearings and return springs for easy installation
Each sensor undergoes rigorous end-of-line testing with thousands of data points to validate output voltages for optimum performance and trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
As a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
$53.10Throttle Position Sensor
$53.10
20V MAX Lithium-Ion 6.0Ah and 4.0Ah Battery and Charger Starter Kit
This 20V MAX starter kit includes a 6.0Ah battery, a 4.0Ah battery, 4 Amp charger, and a kit bag. Both batteries are compact in size and lightweight, providing ergonomic benefits for increased tool maneuverability and control for overhead applications. The charger is compatible with all DEWALT 12-Volt and 20-Volt MAX Lithium-Ion battery packs, this charger is easy to use, quiet and exceptionally stable with its 4-plastic ft.
$189.99
Engine Water Pump
- 100% factory tested for leakage and dimensional precision
- Bearing noise and durability-tested
- Designed to match OE coolant flow rate and pressure
$40.99Engine Water Pump
$40.99
Ignition Control Module
The ignition control module is a solid-state switching device that controls the operation of the ignition coil or coils. It is a small, high-current circuit used to ground the negative side of the coil in order to build charge.
In order to fire a spark plug, the engine management system sends a signal to an ignition module which then sends a signal to the ignition coil. This signal tells the coil how long to charge for and when to fire the spark. This process regulates the vehicle’s base ignition timing.
Ignition Control Modules fail when they overheat. The most common symptom of failure is a no-start. A failing module may give other symptoms, such as engine stuttering and stalling, before it stops working.
Standard® Ignition Control Modules resist failure. Extensive testing and ensure that all Standard Motor Product Ignition Control Modules are manufactured to meet or exceed OE fit, form and function.
Our Ignition Control Modules use top-of-the-line technology to ensure perfect timing every time. They match the OE part and ensure better connections, greater dependability and longer life despite being subjected to the engine’s intense vibrations and the tough operating environment.
$62.00Ignition Control Module
$62.00
1/2 in. VSR™ Pistol Grip Hammer Drill Kit
- 10 amp motor delivers increased drilling performance
- Patented DEWALT®-built motor design generates 50% more power with increased overload protection for added durability
- Dual mode: hammerdrill / drill for versatility in masonry, wood, or steel drilling applications
$219.99
20V MAX* 1 in. Brushless Cordless SDS PLUS D-Handle Rotary Hammer (Tool Only)
- 2.6 Joules of impact energy for fast drilling in concrete
- Lightweight design makes this tool ideal for forming, rod hanging, structural connections, beam & column anchorage, steel stanchion mounting, and clip & bracket mounting
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime
$199.99
68 lb. 1-1/8 in. Hex Pavement Breaker
- Shocks – Active Vibration Control reduces vibration felt by the user at the handles. A Perform and Protect feature
- 52 joules of impact energy provides maximum demolition performance
- 15 amp motor provides maximum power and overload protection
Angle Grinder 4-1/2″ (115mm) – 5″ (125mm) 1500W
- Dust extraction system protects the tool’s motor.
- Electronic safety clutch that stops the disc in less than 0.1 seconds when a jam is detected to prevent accidents.
- Thermal cut-off to prevent overload.
$149.99
12 lb. (5.6kg) SDS MAX Chipping Hammer
- 7.1J”s and 3150 BPM For fast and efficient chipping and breaking, even in the hardest concrete
- Low Vibe Side Handle For comfort during extended working intervals
- At 13lbs is ideally suited for all day work on concrete and masonry walls, floor and wall channeling, and removing plaster and tile from floors, walls and ceilings
$399.99
1 in. SDS Pistol Grip Hammer
- 2.6 joules of impact energy for fast drilling and chipping speed
- 8.0 amp high performance motor
- Rotating brush ring delivers full speed/torque in forward and reverse
$199.991 in. SDS Pistol Grip Hammer
$199.99
Engine Timing Belt Idler
When working with Serpentine and Timing Belts, Tensioners and Idler Bearings are vital to ensure proper engine performance. In some situations, a Tensioner or Idler Bearing is a critical component in protecting your engine from severe damage and catastrophic failure. GMB Tensioner and Idler Bearings features include:
- Rigorous testing and quality control for all bearing components.
- Built to withstand High-Performance use and optimal operation.
- Triple-Lip seal design to maximize grease retention and prevent contamination.
- Precise tolerances for easy installation.
It’s never a good idea to compromise on the quality of Belt Tensioners and Idler Bearings. GMB is known for Global OEM Manufacturing technology, and our proprietary designs ensure your parts are built to last.
$12.99Engine Timing Belt Idler
$12.99
Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$39.99Wheel Bearing
$39.99
1/2″ (13mm) 710W VVR Hammer Drill/Driver
- Mode selector allows you to easily and quickly change speed according to the application to be carried out.
- Ergonomic design for better support.
- Air ventilation slots, offer maximum air flow preventing dust and debris from entering the motor.
$169.99
Maintenance
Use this diet when switching your bird from its old diet to Roudybush. Continue to feed to adult birds that are not laying eggs or feeding chicks. Lories and lorikeets, which will accept this diet, will have drier droppings than they have on nectar. If you have a bird that is a chronic egg-layer or a bird with a tendency to develop hypocalcaemia (like African Greys), mix 2/3 Maintenance with 1/3 High-Energy Breeder to supply more calcium and vitamin D3. Do not give additional vitamin or mineral supplements. Fresh fruit and vegetable treats may be given as a minor part of the diet.
$56.99Maintenance
$56.99
High Energy Breeder
Feed to breeding birds that are feeding chicks. Wean chicks onto this diet for the first 1-3 months post-weaning (3 months for the larger species, one month for the smaller species). High-Energy Breeder will provide these young birds with extra protein, calcium, and Vitamin D3 needed for the continued growth that occurs during that time. The higher energy will help put back the body weight lost in the weaning process. Mix 1/3 High-Energy Breeder to 2/3 Maintenance mixture for use in birds with a higher calcium need or are being introduced to Roudybush. Do not give additional vitamin or mineral supplements, such as cuttlebone, mineral blocks, or multivitamins. Fresh fruits and vegetables may be given as a minor part of the diet.
$56.99High Energy Breeder
$56.99
High Energy Breeder
Feed to breeding birds that are feeding chicks. Wean chicks onto this diet for the first 1-3 months post-weaning (3 months for the larger species, one month for the smaller species). High-Energy Breeder will provide these young birds with extra protein, calcium, and Vitamin D3 needed for the continued growth that occurs during that time. The higher energy will help put back the body weight lost in the weaning process. Mix 1/3 High-Energy Breeder to 2/3 Maintenance mixture for use in birds with a higher calcium need or are being introduced to Roudybush. Do not give additional vitamin or mineral supplements, such as cuttlebone, mineral blocks, or multivitamins. Fresh fruits and vegetables may be given as a minor part of the diet.
$54.99High Energy Breeder
$54.99
Maintenance
Use this diet when switching your bird from its old diet to Roudybush. Continue to feed to adult birds that are not laying eggs or feeding chicks. Lories and lorikeets, which will accept this diet, will have drier droppings than they have on nectar. If you have a bird that is a chronic egg-layer or a bird with a tendency to develop hypocalcaemia (like African Greys), mix 2/3 Maintenance with 1/3 High-Energy Breeder to supply more calcium and vitamin D3. Do not give additional vitamin or mineral supplements. Fresh fruit and vegetable treats may be given as a minor part of the diet.
$56.99Maintenance
$56.99
Breeder
This diet meets the nutritional needs of the growing chick. Feed it to overweight breeding birds that are feeding chicks. Mix 1/3 Breeder with 2/3 Low-Fat Maintenance for overweight birds that are chronic egg layers or overweight birds with a tendency to develop hypocalcaemia (such as African Greys). The mixture provides the extra calcium and vitamin D3 to support egg production or to meet the needs of birds that seem to need more calcium than other birds. Do not give additional vitamin or mineral supplements, such as cuttlebone, mineral block, or multivitamins. Fresh fruits and vegetables may be given as a minor part of the diet.
$56.99Breeder
$56.99
Lory Diet/Nectar 15
This diet is lower in sugar than other brands of nectars, so switching a bird from another brand of nectar sometimes requires adding a small amount of powdered sugar to the diet and slowly eliminating it to convert the birds. Less sugar is helpful to reduce incidence of yeast infections that lories are prone to due to the high sugar diets they are commonly fed. Some people grind up the maintenance pellets into a powder or convert their birds to maintenance crumbles. Lories do very well on the maintenance diet. Feeding pellets, crumbles, or dry powdered Lory Nectar will result in drier, easier to clean up droppings, making lories that much more pleasant to live with. Although some people use the Lory Nectar to handfeed lory chicks, we recommend using Formula 3, which provides a little higher protein needed for growth in the chicks and eliminates the sugar that could lead to yeast infections.
Also: Formulated for hand-feeding hummingbirds from 0-3 weeks of age; it contains 15% protein. Not for use in Hummingbird feeders.
$149.99Lory Diet/Nectar 15
$149.99Engine Water Pump
All mechanical GMB water pumps meet or exceed OEM standards for performance and durability.
- Whether the housing is made of cast iron, aluminum, or stamped steel, our tight manufacturing tolerances make installation simple and trouble-free.
- Cooling is maximized with our precision-formed impellers and tested to meet or exceed OEM flow rate specifications at various RPMs.
- Our proprietary shaft seal design withstands wear, preventing leaks and maximizing longevity.
- Our genuine GMB steel bearings are made from top-quality materials.
Water pump failures can cause catastrophic damage to an engine; we make sure every GMB Water Pump will meet or exceed OEM specifications. And because we manufacture every water pump to tight tolerances, our dimensions are accurate, and installation is easy (easy installation is essential, as it prevents many of the issues that lead to leaks and premature failure).
When it’s time to replace the water pump in your vehicle, it makes sense to go with a reliable, top-quality replacement from GMB.
$33.99Engine Water Pump
$33.99
Wheel Bearing Collar
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$20.00Wheel Bearing Collar
$20.00
DeWalt DCK2050M2 20V Max 2-Tool Combo Kit 20V MAX HAMR DR/IMP DRV COMBO
- DCD996 20V MAX*1/2 in. hammerdrill 3-speed, high performance (0-2,000 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time
- DCD996 20V MAX*1/2 in. hammerdrill 0-38,250 BPM for fast drilling in masonry materials
- DCD996 20V MAX*1/2 in. hammerdrill has a compact size (8.4 in. front-to-back length) and lightweight (4.7 lb) design to fit tight areas
$299.99
Fuel Pump and Strainer Set
OE Replacement Electric Fuel Pump Motors
GMB Fuel Pumps use only durable, OE replacement electric motors. These motors are developed to match the manufacturer’s specifications in terms of voltage, amperage, resistance, pressure, and volume to guarantee long lasting performance, consistent fuel pressure, and steady fuel delivery. GMB Fuel Pumps also use 99.90% pure copper on the internal wiring for greater electrical conductivity and optimal performance.
High-Grade Aluminum Cased Motors
GMB Fuel Pump motors are encased in a plastic fixture, and then that fixture is enclosed in a high-grade protective aluminum heat dissipation sleeve made of 5052 grade aluminum alloy.
150 Micron Pre-Pump Fuel Filters (Strainer)
GMB Pre-Pump Fuel Filters (also called a strainer) have a 150 micron rating and are made from the best non-paper filtering material available. All GMB Fuel Pump Assemblies include a filter (strainer). Fuel Strainers are also included with fuel pump kits, where noted.
$40.00Fuel Pump and Strainer Set
$40.00
20V MAX* Brushless 1-1/2 in. Variable Speed Cordless Die Grinder Kit
The 20V MAX* Cordless Die Grinder delivers 500 MWO with the brushless motor and uses the same battery and charger as your other 20V MAX* tools. Perform a variety of grinding applications with a variable speed range of up to 25,000 RPM. For ease of use, the handle can be grasped multiple ways with the dual-position rocker switch.
$169.99
20V MAX* XR® Brushless 5 in. Cordless Variable-Speed Random Orbital Sander Kit
This 20V MAX* XR 5 in. Brushless Cordless Random Orbital Sander comes with a 2.0Ah battery and provides the power and runtime needed to get the job done. A variable-speed dial provides ultimate speed control from 8,000 to 12,000 OPM for a variety of projects. One-handed locking dust bag attaches securely to the sander to aid in dust collection or the user can attach the sander directly to the DWV010 or DWV012 dust collectors. Rubber overmold grip provides comfortable sanding. Replacement 8-hole hook-and-loop sanding pad for quick, easy paper changing.
$119.99
