No products in the cart.
Engine Water Pump
All mechanical GMB water pumps meet or exceed OEM standards for performance and durability.
- Whether the housing is made of cast iron, aluminum, or stamped steel, our tight manufacturing tolerances make installation simple and trouble-free.
- Cooling is maximized with our precision-formed impellers and tested to meet or exceed OEM flow rate specifications at various RPMs.
- Our proprietary shaft seal design withstands wear, preventing leaks and maximizing longevity.
- Our genuine GMB steel bearings are made from top-quality materials.
Water pump failures can cause catastrophic damage to an engine; we make sure every GMB Water Pump will meet or exceed OEM specifications. And because we manufacture every water pump to tight tolerances, our dimensions are accurate, and installation is easy (easy installation is essential, as it prevents many of the issues that lead to leaks and premature failure).
When it’s time to replace the water pump in your vehicle, it makes sense to go with a reliable, top-quality replacement from GMB.
$33.99Engine Water Pump
$33.99
Water Pump
GMB knows water pumps inside and out. Drawing on decades of water pump manufacturing and engineering experience, each water pump is manufactured to strict OEM specifications of quality, design, and fitment to ensure a high-quality finished product that is made to last. In fact, GMB provides water pumps to OE car makers including Hyundai, Kia, GM, and Chrysler. Enjoy the perks of having an OEM-quality water pump in your vehicle without the high price tag!
Features & Benefits:
- 100% factory tested for leakage and dimensional precision
- Designed to match OE coolant flow rate and pressure
- Built with high-quality GMB bearings
- Bearings are noise and durability tested
- Built with exact OEM dimensions
- Includes all required hardware for installation
$31.99Water Pump
$31.99
Integrated Housing Thermostat-192 Degrees w/ Seal
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
$30.99
Engine Coolant Pipe
Original equipment coolant pipes often fail due to frail plastic construction. This Dorman OE FIX replacement is made of aluminum for greater durability to prevent future failure.
- Direct replacement – this engine coolant pipe installs exactly as the original part for a perfect fit
- Improved design – this coolant pipe is made of aluminum instead of plastic for greater durability and leak resistance
- Durable materials – designed for greater heat resistance in harsh underhood environment
- Quality assured – part has undergone fitment and pressure testing to ensure quality and performance
$29.99Engine Coolant Pipe
$29.99
WATER PUMP
High-Strength Steel Bearing
GMB has manufactured bearings for over 75 years in the global market for both the OEM and aftermarket industries. GMB has studied all aspects of bearing manufacturing to design the highest-quality bearings with proper high-grade steel, precision bearing race machining and polishing, and proper grease selection. GMB uses roller bearings for all high-load applications.
Proprietary Formulated Mechanical Seal
GMB Mechanical Shaft Seals are made with proprietary elastomers and agents for protection and sealing power. GMB Shaft Seals utilize carbon and ceramic sealing surfaces for superior wear resistance.
Precision OEM-Spec Water Pump Housing
GMB Water Pump Housings are manufactured to match the exact OEM-spec materials (cast iron, aluminum, or stamped steel). Each housing is precision measured using state-of-the-art technology to be dimensionally correct up to a 99% accuracy with strict tolerance limits.
Precision-Formed Impeller
GMB Water Pump Impellers are manufactured to match the exact OEM-spec materials (metal or polymer composite) based specifically on the OEM design. Each impeller is also precision measured to be dimensionally correct up to a 99% accuracy with strict tolerance limits.
$26.99WATER PUMP
$26.99
Hose Water (Lower)
Our molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped to fit and to ensure perfectly sealed conditions.
- Aramid or rayon knit reinforcement (depending on the application).
$25.99Hose Water (Lower)
$25.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$24.99Curved Radiator Hose
$24.99
THERMOSTAT HOUSING
Thermostat Housing
Features:
Made from high quality materials to maintain proper cooling of your engine and prevent overheating
Engineered to meet or exceed OE standards
Heavy cast OE style construction
Quality machined threaded ports
Corrosion and rust inhibitor coated
Products are engineered and tested to provide years of trouble free operationAttention California Customers – Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Alternate/OEM Part Number(s): F57Z8592AB, F5TZ8592AA
SKP Warranty Information:
12 Months$24.99THERMOSTAT HOUSING
$24.99
Hose, Water (Upper)
Our molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped to fit and to ensure perfectly sealed conditions.
- Aramid or rayon knit reinforcement (depending on the application).
$19.99Hose, Water (Upper)
$19.99
Radiator Lower Hose
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40˚F (-40˚C) to +257˚F (+125˚C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
$19.99Radiator Lower Hose
$19.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$17.99Radiator Hose
$17.99
Radiator Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$17.99Radiator Hose
$17.99
Curved Radiator Hose
Dayco Molded Radiator and By-Pass Hose
Designed to replace OEM hoses on today’s light duty vehicles for superior performance.
The Dayco molded radiator and by-pass hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose also meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges.
$16.99Curved Radiator Hose
$16.99
Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J168
$15.99Curved Radiator Hose
$15.99
Curved Radiator Hose
Designed as an aftermarket replacement for OEM manufactured branched cooling system hoses.
The Dayco branched radiator hose features an all EPDM construction that resists the effects of oil, mud, salt and ozone, and a knitted rayon reinforced inner tube that stands up to temperature ranges of -40˚F (-40˚C) to +257˚F (+125˚C). With leak-proof junctions that ensure long service life and unrestricted flow, this branched hose meets SAE J20R4, Class D-1, Type EC electro-chemical requirements as specified in SAE J1684.
$15.99Curved Radiator Hose
$15.99
Thermostat-180 Degrees
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
$15.99Thermostat-180 Degrees
$15.99
Thermostat-180 Degrees
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
$14.99Thermostat-180 Degrees
$14.99
Upper Hose
Our molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped to fit and to ensure perfectly sealed conditions.
- Aramid or rayon knit reinforcement (depending on the application).
$12.99Upper Hose
$12.99
Thermostat
THERMOSTAT-192 DEGREES W/ SEAL
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
207-192
THERMOSTAT-192 DEGREES
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable$12.99Thermostat
$12.99
Radiator cap
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
$11.99Radiator cap
$11.99
