CARICO
Wheel Bearing and Hub Assembly
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
GMB Wheel Bearing & Hub Assemblies contain specially formulated bearing grease. This special bearing grease has superior lubrication, enhanced thermal dissipation, water wash-out resistance, and better ability to lock in oils to keep the bearings rolling at optimal performance!
GMB Bearings are made of a high strength GCR15 steel, subjected to a proprietary process to achieve maximum hardness, and then finally treated with a G-10 finish.
$42.99
Engine Water Pump
Working of Water Pump
Water cooled Engine is to have cooling system that cooling water (LLC) is made to circulate to Radiator. Cylinder Block and Water Jacket in the Cylinder Head and keep Engine at the suitable temparature.
Water Pump is installed in the front of Cylinder Block. is driven with Timing Belt or Fan Belt through Pulley and work to make cooling water (LLC) circulate.
$31.99Engine Water Pump
$31.99
Engine Water Pump
Working of Water Pump
Water cooled Engine is to have cooling system that cooling water (LLC) is made to circulate to Radiator. Cylinder Block and Water Jacket in the Cylinder Head and keep Engine at the suitable temparature.
Water Pump is installed in the front of Cylinder Block. is driven with Timing Belt or Fan Belt through Pulley and work to make cooling water (LLC) circulate.
$39.99Engine Water Pump
$39.99
Engine Water Pump
Water cooled Engine is to have cooling system that cooling water (LLC) is made to circulate to Radiator. Cylinder Block and Water Jacket in the Cylinder Head and keep Engine at the suitable temparature.
Water Pump is installed in the front of Cylinder Block. is driven with Timing Belt or Fan Belt through Pulley and work to make cooling water (LLC) circulate.
$35.99Engine Water Pump
$35.99
20V MAX Lithium-Ion 6.0Ah and 4.0Ah Battery and Charger Starter Kit
This 20V MAX starter kit includes a 6.0Ah battery, a 4.0Ah battery, 4 Amp charger, and a kit bag. Both batteries are compact in size and lightweight, providing ergonomic benefits for increased tool maneuverability and control for overhead applications. The charger is compatible with all DEWALT 12-Volt and 20-Volt MAX Lithium-Ion battery packs, this charger is easy to use, quiet and exceptionally stable with its 4-plastic ft.
$189.99
Engine Water Pump
- 100% factory tested for leakage and dimensional precision
- Bearing noise and durability-tested
- Designed to match OE coolant flow rate and pressure
$40.99Engine Water Pump
$40.99
Engine Water Pump
Working of Water Pump
Water cooled Engine is to have cooling system that cooling water (LLC) is made to circulate to Radiator. Cylinder Block and Water Jacket in the Cylinder Head and keep Engine at the suitable temparature.
Water Pump is installed in the front of Cylinder Block. is driven with Timing Belt or Fan Belt through Pulley and work to make cooling water (LLC) circulate.
$42.95Engine Water Pump
$42.95
1/2 in. VSR™ Pistol Grip Hammer Drill Kit
- 10 amp motor delivers increased drilling performance
- Patented DEWALT®-built motor design generates 50% more power with increased overload protection for added durability
- Dual mode: hammerdrill / drill for versatility in masonry, wood, or steel drilling applications
$219.99
20V MAX* 1 in. Brushless Cordless SDS PLUS D-Handle Rotary Hammer (Tool Only)
- 2.6 Joules of impact energy for fast drilling in concrete
- Lightweight design makes this tool ideal for forming, rod hanging, structural connections, beam & column anchorage, steel stanchion mounting, and clip & bracket mounting
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime
$199.99
68 lb. 1-1/8 in. Hex Pavement Breaker
- Shocks – Active Vibration Control reduces vibration felt by the user at the handles. A Perform and Protect feature
- 52 joules of impact energy provides maximum demolition performance
- 15 amp motor provides maximum power and overload protection
Angle Grinder 4-1/2″ (115mm) – 5″ (125mm) 1500W
- Dust extraction system protects the tool’s motor.
- Electronic safety clutch that stops the disc in less than 0.1 seconds when a jam is detected to prevent accidents.
- Thermal cut-off to prevent overload.
$149.99
12 lb. (5.6kg) SDS MAX Chipping Hammer
- 7.1J”s and 3150 BPM For fast and efficient chipping and breaking, even in the hardest concrete
- Low Vibe Side Handle For comfort during extended working intervals
- At 13lbs is ideally suited for all day work on concrete and masonry walls, floor and wall channeling, and removing plaster and tile from floors, walls and ceilings
$399.99
1 in. SDS Pistol Grip Hammer
- 2.6 joules of impact energy for fast drilling and chipping speed
- 8.0 amp high performance motor
- Rotating brush ring delivers full speed/torque in forward and reverse
$199.991 in. SDS Pistol Grip Hammer
$199.99
Timing Component Kit
Gates® is the world’s largest manufacturer of PowerGrip™ Timing Belts and PowerGrip Kits. We designed our kits for virtually every vehicle make and model, so technicians can conduct complete system replacements and streamline parts sourcing. As the Original Equipment Manufacturer (OEM) for over 35 vehicle manufacturers worldwide, our Timing Component Kits are OE-equivalent or better in service life, quality, and performance.
- Total solution for any application. TCK includes belts, idler(s), tensioners, tensioner springs, supporting hardware, detailed installation instructions, and Technical Service Bulletins for troublesome applications.
- Designed for convenience, easy parts sourcing, and reduced customer comebacks.
- Gates warranty matches the original manufacturer’s replacement intervals — not just for parts, but also for labor and other associated costs.
$49.99Timing Component Kit
$49.99
Carquest Premium Alternator: Remanufactured
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
$204.99
Electric Reciprocating Saw (7.5 Amp)
7.5 Amp Reciprocating Saw has a powerful 7.5 Amp motor with a 1-1/8-inch stroke length for speed of application. The variable speed trigger provides optimal control over a variety of materials. Cut in a variety of positions and be comfortable doing so with the over-molded handle.
- SPEED OF COMPLETION: High performance motor with 1-1/8-in stroke length for speed of completing applications
- ADDED CONTROL: Variable speed trigger ranging from 0-3,200 RPM for added control in a variety of materials
- QUICK BLADE CHANGE: Tool-Free blade release for quick and easy blade changes
- COMFORT: Contoured over-molded handle for added comfort during use
$90.00
4-1/2-in Electric Small Angle Grinder (7.5 Amp)
7.5 Amp 4-1/2-inch Paddle Switch Small Angle Grinder has a high performing motor the cordless grinder allows for aggressive grinding and cutting applications.
- COMPLETE DEMANDING APPLICATIONS: Powerful 7.5 Amp motor producing 12,000 RPM for demanding jobsite applications
- QUICK ADJUSTMENTS: Tool-Free guard makes for quick and easy adjustments
- COMFORT: Contoured over-molded handle for added comfort during use
- ADDED CONTROL: 2-Position handle allows for control in different applications
$85.99
3/8-in Drive 5/8-in Spark Plug Socket
Your toolbox isn’t complete without the 3/8-inch Drive 5/8-inch Spark Plug Socket. This spark plug socket comes with large size markings and a rust resistant coating.
- CORROSION RESISTANCE: Socket with full polish chrome finish
- INCREASED TORQUE: 6-point spark plug socket with fastener
- Meets or Exceeds ASME Specifications
- QUICK SIZE IDENTIFICATION: 5/8 spark plug socket has large markings
$10.99
3/8-in Drive 13/16-in Spark Plug Socket
Your toolbox isn’t complete without the 3/8-inch Drive 13/16-inch Spark Plug Socket. This socket comes with large size markings and a rust resistant coating.
- CORROSION RESISTANCE: Full Polish Chrome Finish
- INCREASED TORQUE: 6 Point Socket with fastener
- QUICK SIZE IDENTIFICATION: Large Markings
- Meets or Exceeds ASME Specifications
$10.99
Radiator: With Transmission Oil Cooler
Warranty Details (LIMITED LIFETIME REPLACEMENT)Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicles engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
$200.00
Hose, Water (Upper)
Our molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped to fit and to ensure perfectly sealed conditions.
- Aramid or rayon knit reinforcement (depending on the application).
$19.99Hose, Water (Upper)
$19.99
Hose Water (Lower)
Our molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped to fit and to ensure perfectly sealed conditions.
- Aramid or rayon knit reinforcement (depending on the application).
$25.99Hose Water (Lower)
$25.99
Engine Timing Belt Idler
When working with Serpentine and Timing Belts, Tensioners and Idler Bearings are vital to ensure proper engine performance. In some situations, a Tensioner or Idler Bearing is a critical component in protecting your engine from severe damage and catastrophic failure. GMB Tensioner and Idler Bearings features include:
- Rigorous testing and quality control for all bearing components.
- Built to withstand High-Performance use and optimal operation.
- Triple-Lip seal design to maximize grease retention and prevent contamination.
- Precise tolerances for easy installation.
It’s never a good idea to compromise on the quality of Belt Tensioners and Idler Bearings. GMB is known for Global OEM Manufacturing technology, and our proprietary designs ensure your parts are built to last.
$12.99Engine Timing Belt Idler
$12.99
Upper Hose
Our molded coolant hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, costs, and energy from going to your OE dealer for radiator hose replacements. Approved for Marine applications. Gates’ curved hose line is the most comprehensive line on the replacement market.
- Engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped to fit and to ensure perfectly sealed conditions.
- Aramid or rayon knit reinforcement (depending on the application).
$12.99Upper Hose
$12.99
Wheel Bearing
GMB’s High-Grade Wheel Bearings and Hub Assemblies offer OEM strength and longevity. GMB Wheel Bearings & Hub Assemblies feature:
- High-grade GCR15 steel with G-10 resin finish prevents premature failure and is built for high temperatures and heavy loads.
- Premium grade ABS sensors with 99.9% pure copper wiring for greater electrical conductivity and optimal brake system performance.
- Triple and quadruple lip seal designs ensure your bearings have maximum protection from the elements and dust.
- Roll-formed hubs eliminate the need for welding, which improves strength (welding can create weak points within the hub, so we don’t weld our hubs).
With GMB’s 100% factory-tested Wheel Bearings & Hub Assemblies, you can be confident in weather protection, proper lubrication, and optimal hub performance.
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$39.99Wheel Bearing
$39.99
1/2″ (13mm) 710W VVR Hammer Drill/Driver
- Mode selector allows you to easily and quickly change speed according to the application to be carried out.
- Ergonomic design for better support.
- Air ventilation slots, offer maximum air flow preventing dust and debris from entering the motor.
$169.99Engine Water Pump
All mechanical GMB water pumps meet or exceed OEM standards for performance and durability.
- Whether the housing is made of cast iron, aluminum, or stamped steel, our tight manufacturing tolerances make installation simple and trouble-free.
- Cooling is maximized with our precision-formed impellers and tested to meet or exceed OEM flow rate specifications at various RPMs.
- Our proprietary shaft seal design withstands wear, preventing leaks and maximizing longevity.
- Our genuine GMB steel bearings are made from top-quality materials.
Water pump failures can cause catastrophic damage to an engine; we make sure every GMB Water Pump will meet or exceed OEM specifications. And because we manufacture every water pump to tight tolerances, our dimensions are accurate, and installation is easy (easy installation is essential, as it prevents many of the issues that lead to leaks and premature failure).
When it’s time to replace the water pump in your vehicle, it makes sense to go with a reliable, top-quality replacement from GMB.
$33.99Engine Water Pump
$33.99Wheel Hub
CARICO chassis parts are designed and manufactured to meet OEM standards and undergo strict quality tests to ensure a perfect fit.
- All parts are manufactured with ISO 9001 certification.
- Company legally registered in Taiwan, official company documents available on the Internet, you can absolutely trust us.
- Our business includes national and international sales, definitely quality tested by the aftermarket.
- Energetic and professional group. Our team has an experience of more than 35 years in the professional area. No matter what kind of problem you have encountered, it is our pleasure to help you solve it.
$29.99Wheel Hub
$29.99
Wheel Bearing Collar
- High-Grade Resin-Treated GCR15 Steel for Maximum Hardness and Extreme Temperature Resistance
- Specially Formulated Grease for Enhanced Thermal Dissipation, Superior Lubrication, and Water Wash-Out Resistance
- Triple and Quadruple Lip Sealing Technology and High Moisture Resistance Rubber for Maximum Bearing Protection
$20.00Wheel Bearing Collar
$20.00
DeWalt DCK2050M2 20V Max 2-Tool Combo Kit 20V MAX HAMR DR/IMP DRV COMBO
- DCD996 20V MAX*1/2 in. hammerdrill 3-speed, high performance (0-2,000 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time
- DCD996 20V MAX*1/2 in. hammerdrill 0-38,250 BPM for fast drilling in masonry materials
- DCD996 20V MAX*1/2 in. hammerdrill has a compact size (8.4 in. front-to-back length) and lightweight (4.7 lb) design to fit tight areas
$299.99
Fuel Pump and Strainer Set
OE Replacement Electric Fuel Pump Motors
GMB Fuel Pumps use only durable, OE replacement electric motors. These motors are developed to match the manufacturer’s specifications in terms of voltage, amperage, resistance, pressure, and volume to guarantee long lasting performance, consistent fuel pressure, and steady fuel delivery. GMB Fuel Pumps also use 99.90% pure copper on the internal wiring for greater electrical conductivity and optimal performance.
High-Grade Aluminum Cased Motors
GMB Fuel Pump motors are encased in a plastic fixture, and then that fixture is enclosed in a high-grade protective aluminum heat dissipation sleeve made of 5052 grade aluminum alloy.
150 Micron Pre-Pump Fuel Filters (Strainer)
GMB Pre-Pump Fuel Filters (also called a strainer) have a 150 micron rating and are made from the best non-paper filtering material available. All GMB Fuel Pump Assemblies include a filter (strainer). Fuel Strainers are also included with fuel pump kits, where noted.
$40.00Fuel Pump and Strainer Set
$40.00
M320 21-in 163cc RWD Self-Propelled Mower
This 21-in. self-propelled rear wheel drive mower features a 163cc, OHV Briggs & Stratton® engine with one step starting, no priming needed. Its 3-in-1 convertible deck allows you to mulch, helping to put nutrients back in the soil for a healthier lawn, discharge or use the 2.3 bushel Dust Blocker bag for easy cleanup or composting. Equipped with a Pace Control System, this mower matches your natural stride providing the perfect mowing speed. Its large 8-in. front and 11-in. rear wheels provide improved maneuverability on any terrain and the dual-lever, 6-position height adjustment makes it easy for you to change the cutting height while mowing.
$650.00
Impact Rated™ 3-in Magnetic Screwdriving Bit Holder Set
IMPACT RATED™ 3-in. Magnetic Screwdriving Bit Holder Set is engineered to last longer than standard bits. The optimized torsion zone is designed for Impact Driver use, while each bit tip ensures a precise fit in each screw recess, helping to reduce wear, stripping and cam-out.
$13.99
20V MAX* Brushless 1-1/2 in. Variable Speed Cordless Die Grinder Kit
The 20V MAX* Cordless Die Grinder delivers 500 MWO with the brushless motor and uses the same battery and charger as your other 20V MAX* tools. Perform a variety of grinding applications with a variable speed range of up to 25,000 RPM. For ease of use, the handle can be grasped multiple ways with the dual-position rocker switch.
$169.99
20V MAX* XR® Brushless 5 in. Cordless Variable-Speed Random Orbital Sander Kit
This 20V MAX* XR 5 in. Brushless Cordless Random Orbital Sander comes with a 2.0Ah battery and provides the power and runtime needed to get the job done. A variable-speed dial provides ultimate speed control from 8,000 to 12,000 OPM for a variety of projects. One-handed locking dust bag attaches securely to the sander to aid in dust collection or the user can attach the sander directly to the DWV010 or DWV012 dust collectors. Rubber overmold grip provides comfortable sanding. Replacement 8-hole hook-and-loop sanding pad for quick, easy paper changing.
$119.99
