No products in the cart.
Ignition Control Module
The ignition control module is a solid-state switching device that controls the operation of the ignition coil or coils. It is a small, high-current circuit used to ground the negative side of the coil in order to build charge.
In order to fire a spark plug, the engine management system sends a signal to an ignition module which then sends a signal to the ignition coil. This signal tells the coil how long to charge for and when to fire the spark. This process regulates the vehicle’s base ignition timing.
Ignition Control Modules fail when they overheat. The most common symptom of failure is a no-start. A failing module may give other symptoms, such as engine stuttering and stalling, before it stops working.
Standard® Ignition Control Modules resist failure. Extensive testing and ensure that all Standard Motor Product Ignition Control Modules are manufactured to meet or exceed OE fit, form and function.
Our Ignition Control Modules use top-of-the-line technology to ensure perfect timing every time. They match the OE part and ensure better connections, greater dependability and longer life despite being subjected to the engine’s intense vibrations and the tough operating environment.
$62.00Ignition Control Module
$62.00
Thermostat-170 Degrees
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Carquest Premium Alternator: Remanufactured
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
$204.99
Radiator: With Transmission Oil Cooler
Warranty Details (LIMITED LIFETIME REPLACEMENT)Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicles engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
$200.00
Radiator cap
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
$11.99Radiator cap
$11.99
Engine Coolant Thermostat Seal
Gaskets are made from high quality materials suitable for resistance to high temperatures and engine coolant to maintain a good seal. On adhesive backed gaskets, the backing reduces installation time by ensuring proper alignment and ease of installation. Thermostat seals are precision designed and made from high quality rubber products ensuring an accurate fit and durability for a long lasting seal.
Features:
- High quality materials used for increased strength and durability
- Adhesive backed gaskets reduce installation time and ensure proper alignment
- Meets or exceeds all OEM standards
$4.99
Thermostat-180 Degrees
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
$14.99Thermostat-180 Degrees
$14.99
Integrated Housing Thermostat-192 Degrees w/ Seal
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
$30.99
Thermostat-180 Degrees
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
$15.99Thermostat-180 Degrees
$15.99
RADIATOR CAP
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
$6.99RADIATOR CAP
$6.99
Distributor Rotor
Intermotor® is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor® parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor® is the import leader by design.
High dielectric-strength engineering polymer prevents breakdown or arcing and ensures long life
Solid brass segment resists pitting and erosion for extended life
Utilizes shaft retention clips for proper distributor shaft fit
Noise-suppressing coating on segment prevents electrical interference with radio and other electronic circuits
$5.99Distributor Rotor
$5.99
Distributor Cap
Intermotor® is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor® parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor® is the import leader by design.
Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
Capitalizing on decades of research and development, our distributor caps and rotors contain unmatched quality yielding superior performance
As a global manufacturer of original equipment ignition products, we maintain complete quality control throughout the manufacturing process from componentry to finished product
$17.99Distributor Cap
$17.99
Radiator
1 Row Plastic Tank Aluminum Core
Radiator
CSF factories are ISO/TSO certified;CSF Radiators are designed and built to High Performance Standards & sold worldwide for over 50 years – over 30 Million Units Sold!;Our Radiators are carefully engineered & Wind Tunnel Tested in labratory for Cooling Performance Validation;We have over 10,000 different models of Radiators that we manufacture & supply for all the leading brands of vehicles on the road
- OEM specified Plastic Tank-Aluminum Core Construction
- Tanks are made from Virgin Grade Engineered plastic resins, which are “Glass Filled” for added Strength & Durability
- Gaskets are made from Special Grade “EPDM” rubber to withstand extreme temperatures of up to -120 Degrees F
- Tubes – Welded Type or Latest Generation “B-Tube” Design
- Fins (Heart of Radiator) – High Performance “Multi-Louvered Design” – OEM Spec
- 100% leak tested before leaving factory at 150% of operating pressure
- Industry Best Packaging – “10 Foot Drop Test” Standard
- Drop-in Fit
- High Performance Transmission Cooler with special Built-in Turburlator, when applicable
- All components are installed, torqued, & tested on Radiator during assembly
